----- Original Message ----- From: "John Millican" <[EMAIL PROTECTED]>
To: "Asterisk Users Mailing List - Non-Commercial Discussion" <asterisk-users@lists.digium.com>
Sent: Monday, February 28, 2005 10:21 AM
Subject: Re: [Asterisk-Users] Dial out through Broadvoice
On Saturday February 26 2005 4:45 pm, John Millican wrote:
On Saturday February 26 2005 4:30 pm, Chris Ford wrote:
> I tried to call you number to see what I would get and you have a > verizon
> Voice messaging service.
if you called the 6037862111 that is a voicemail number tyhat i was calling
to test knowing it would not be busy and would not bother anyone.
> Make sure you have your iax set up right in the Iax.conf and your
> outbaound registering string going back out.
> I have mine set up that I dial 6 to get out on my broadvoice line > and 9
> to get out on my voice pulse line.
I am not using IAX at all. Did not think broadvoice supported it, am I
wrong?
More Comments at BOTTOM
> >> Hello all,
> >> When I call the Broadvoice number all is good.
> >> When I try to call out through DISA on my broadvoice line i get > >> the
> >
> > following:
> >> Executing Dial("SIP/147.135.0.129-0815bc60",
> >> "SIP/[EMAIL PROTECTED]|30") in new stack
> >> -- Called [EMAIL PROTECTED]
> >> -- Got SIP response 480 "Temporarily Not Available" back from
> >> 147.135.16.128
> >> -- SIP/proxy.bos.broadvoice.com-3493 is circuit-busy
> >> == Everyone is busy/congested at this time
> >> -- Executing Busy("SIP/147.135.0.129-0815bc60", "") in new > >> stack
> >> == Spawn extension (outgoing, 16037862111, 102) exited non-zero > >> on
> >> 'SIP/147.135.0.129-0815bc60'
> >>
> >> Is this as simple as it seems? Broadvoice is circut busy? Can > >> any
> >
> > one think
> >
> >> of any other reason I might get this message? Or do I just need > >> to
> >
> > call
> >
> >> BroadVoice and complain? I have tried two different proxy's (ip's > >> in
> >> /etc/hosts) and get the same error.
> >>
> >> in extensions.conf:
> >> [outgoing]
> >> exten => _1NXXNXXXXXX, 1, dial(SIP/${EXTEN}
> >
> > @proxy.bos.broadvoice.com,30) ;
> >
> >> exten => _1NXXNXXXXXX, 2, congestion() ; No answer, nothing
> >> exten => _1NXXNXXXXXX, 102, busy() ; Busy
> >>
> >> in sip.conf:
> >> [general]
> >> context=default ; Default context for incoming
> >
> > calls
> >
> >> port=5060 ; UDP Port to bind to (SIP standard
> >
> > port is 5060)
> >
> >> bindaddr=192.168.123.100 ; IP address to bind to
> >
> > (0.0.0.0 binds to all)
> >
> >> srvlookup=yes ; Enable DNS SRV lookups on outbound
> >
> > calls
> >
> >> ; Note: Asterisk only uses the first
> >
> > host
> >
> >> ; in SRV records
> >> ; Disabling DNS SRV lookups disables
> >
> > the
> >
> >> ; ability to place SIP calls based on
> >
> > domain
> >
> >> ; names to some other SIP users on the
> >
> > Internet
> >
> >> register =>
> >
> > [EMAIL PROTECTED]:XXXXXXXXXX:[EMAIL PROTECTED]
> >
> >> [broadvoice1]
> >> type=friend
> >> username=603XXXXXXX
> >> fromuser=603XXXXXXX
> >> secret=XXXXXXXXXX
> >> host=proxy.bos.broadvoice.com
> >> fromdomain=sip.broadvoice.com
> >> context=broadvoice
> >> dtmfmode=inband
> >> disallow=all
> >> allow=ulaw
> >> canreinvite=no
> >> nat=yes
> >>
> >> [bv-in-1]
> >> type=friend
> >> host=sip.broadvoice.com
> >> context=broadvoice
> >> dtmfmode=inband
> >> canreinvite=no
> >> nat=yes
> >
> > Try adding this line to sip:
> > insecure=very
Added insecure=very and same message
> > see if that helps. if not, try a standard registration string > > instead
> > of the one broadvoice tells you to use.
> >
> > Also - make sure you're using the password they sent you in an > > email -
> > not the one you used when you signed up on their website.
Registration seems to work and shows as registered when i run sip show registry.
I have been on the support line with broadvoice several times now >and still no
resolution, so I am askking help again, please. Below is sip show >registry
and a sip debug. Does any one have any sugestions? I followed >the
instrution at http://edvina.net/broadvoice/ along with others and >sytill no
luck on outbound calls. in the sip debug it is showing the internal >ip in
the callid field. I have externip= external ip in sip .conf am i >missing
something else?
linux*CLI> sip show registry Host Username Refresh State sip.broadvoice.com:5060 [EMAIL PROTECTED] 15 >Registered
_____________________________________________________
Did you add:
insecure=very
to your config? I don't see it posted. I'm nearly positive it needs to be in there.
If that didn't work, did you try the simple registration string instead of the one Broadvoice tells you to use?
number:[EMAIL PROTECTED]
I'm not exactly sure which of the above fixed the same problem for me - but one of them did. When I did a sip show registry, it showed I was registered, but I still couldn't make outbound calls until I did both items above. These things may not work for you, but why not at least try them? If they don't work, let us know you at least tried them and it didn't work.
Are you using the password Broadvoice emailed you instead of the one you registered on their website?
Another thing I'd try - eliminate the Broadvoice Proxy for now and try to get working so you can make an outbound call. Then try messing with the proxy.
_____________________________________________________________________
A previous post I made (found searching the mailing list) shows:
Here's my portion of sip.conf
[952nnnnnnn] type=friend secret=passwordhere regexten=952nnnnnnn insecure=very host=sip.broadvoice.com fromuser=952nnnnnnn fromdomain=sip.broadvoice.com dtmfmode=inband context=from-pstn canreinvite=yes
Remember, the password you need to use is not the one you signed up with on the broadvoice website - it's the one they emailed you.
I use a standard register string:
register=952nnnnnnn:[EMAIL PROTECTED]
I can tx/rx calls over Broadvoice just fine.
asterisk*CLI> sip show registry Host Username Refresh State sip.broadvoice.com:5060 952nnnnnnn 15 Registered asterisk*CLI>
_______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
