Alex G Robertson wrote:
Ok. I got that. But when I put another PRI from another telco (I use it for Dial clients) it "syncronizes". The clock differnce appear, but this Telco doesn't send me any alarms.
Yeah, I could see that working. As another responder already, spans from multiple telcos are probably already synchronized to each other (or very, very close), so the card's framer can deal with the slight differences.
The difference between 1.544 and 2.048 is not something it can handle.
I am in contact to Digium support and they did not say any thing about using E1 and T1 in the same card.
OK, I could have been mistaken, but it would surprise me if the card could handle it :-)
I can't understand why the clock synchronize when clock on span 4 is set to 0 and when it is set to 1, I get that 443 bps difference in the clocks.
I agree; I don't know why it would work that way either. _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
