Where do you have setup for incoming calls to go? To an extension ? To [<context>] s extension? "sip show registry" does it show that you are registered with BV?
The first 3 questions have to do with Asterisk. If you have them to go to an extension and that extension has DND or it is not re-registered with * after restarting it to take the new settings in other words if asterisk cannot find it then it will return "Unavailable" to BV and BV will forward the caller to the Voicemail. The last question of course is for debugging. If you don't get register then something is definitely wrong like your number or password (typos) and/or your network connection. Are you behind a NAT? My config assumes no NAT because my * box is my firewall/gateway also. If you don't see any registrations then try a soft phone to register with BV and see if the soft phone succeeds. Then you know if BV or your Network has a problem. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of skamp Sent: Sunday, March 06, 2005 2:16 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [Asterisk-Users] BroadVoice configuration changes for Outbound Thats awful funny cause you configuration doesnt work for me at all, i even cut and pasted it as you had it and just modified the XXXXXXXX/PPPPPPP. All i know is until today my system worked flawlessly, so Im not sure we are getting the whole story here. i did add the three params they suggested and outbound started to work again, but inbound is still very broken On Sun, 2005-03-06 at 02:03 -0500, Marios Andreou wrote: > Its working just fine for me. > All IN and OUT. > > sip.conf: > register => [EMAIL PROTECTED]:PPPPPPPPPP:[EMAIL PROTECTED]/<ext> > > Where PPPPPPP is the password in your Account and not the login password for > BroadVoice. > > <ext> is the extension to ring make sure that it is registered again with * > once you restart it. > > Then: > [broadvoice] > type=friend > username=XXXXXXXXXX > fromuser=XXXXXXXXXX > fromdomain=sip.broadvoice.com > secret=PPPPPPPPPP > host=sip.broadvoice.com > port=5060 > dtmfmode=inband > insecure=very > context=broadvoice > qualify=yes > disallow=all > allow=ulaw > ;Disable canreinvite if you are behind a NAT > ;canreinvite=no > nat=no > > That's it. > > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mike Matthews > Sent: Sunday, March 06, 2005 1:35 AM > To: Asterisk Users Mailing List - Non-Commercial Discussion; [EMAIL PROTECTED] > Subject: Re: [Asterisk-Users] BroadVoice configuration changes for Outbound > > EXCUSE ME!! I changed NOTHING except added the variables you > indicated. Then incoming calls stop. So I change back to prior > sip.conf and incoming calls work again. So you tell me....if they are > totally unrelated, then why do incoming calls go straight to BV > voicemail when I apply your changes and start working again when I > remove your changes? > > Also, insulting your customers is not the way to keep them. Or maybe BV > wants to get rid of Asterisk users. > > > Dan Weber wrote: > > > > > They are completely unrelated. Maybe you should read instructions. > > > > Dan > > > > On Sat, 5 Mar 2005, Mike Matthews wrote: > > > >> Why can't Broadvoice just LEAVE WELL ENOUGH ALONE!!!!!! Now, after > >> applying these new variables, I can't receive INCOMING calls. > >> Sheesh, what a bunch of BS!! Now we have to spend another weekend > >> fixing what BV screws up. > >> > >> > >> Dan Weber wrote: > >> > >>> Today, We have added INVITE Authentication. This seems to bring a > >>> large amount of problems to people in the way since they can't make > >>> outbound calls. Here's what needs to be done. You need to add > >>> three variables to your peers or friends, username, authuser, and > >>> secret. > >>> > >>> username=<phonenumber> > >>> authuser=<phonenumber> > >>> secret=<registration password> > >>> > >>> Dan > >>> > >> > > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > -- skamp <[EMAIL PROTECTED]> _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users