Hi, I'm a newbie on * trying to setup an HFC card.
I'm locked for many days getting the all-circuits-busy. And no idea what else to look for/how to diagnose.
I'm in Spain, I've tried changing many parameters on zapata/zaptelcong with no luck, also NT & TE modes (honsetly, I've no idea what is).
Any clue will be very much appreciated!
I've installed [EMAIL PROTECTED] on my RH9, and on top of that, bristuff-0.2.0-RC7f (that reinstalls asterisk).
Here you have what I've:
lspci output:
01:02.0 Network controller: Cologne Chip Designs GmbH ISDN network controller [HFC-PCI] (rev 02)
When loading zaptel drivers:
Mar 6 21:29:13 linux-1 kernel: Zapata Telephony Interface Registered on major 196
Mar 6 21:29:13 linux-1 kernel: PCI: Enabling device 01:02.0 (0000 -> 0003)
Mar 6 21:29:13 linux-1 kernel: zaphfc: CCD/Billion/Asuscom 2BD0 configured at mem 0xf91c5e00 fifo 0xf7598000(0x37598000) IRQ 5 HZ 100
Mar 6 21:29:13 linux-1 kernel: zaphfc: Card 0 configured for NT mode
Mar 6 21:29:13 linux-1 kernel: zaphfc: 1 hfc-pci card(s) in this box.
Mar 6 21:29:13 linux-1 kernel: Registered tone zone 3 (Netherlands)
mar 6 21:29:13 linux-1 zaptel: Loading zaptel framework: succeeded
Mar 6 21:29:15 linux-1 kernel: Specify address with base=0xNNNNN
Mar 6 21:29:15 linux-1 kernel: Registered Tormenta2 PCI
Mar 6 21:29:17 linux-1 kernel: Registered tone zone 3 (Netherlands)
mar 6 21:29:17 linux-1 zaptel: Running ztcfg: succeeded
mar 6 21:29:34 linux-1 su(pam_unix)[21409]: session opened for user asterisk by (uid=0)
mar 6 21:29:34 linux-1 su(pam_unix)[21409]: session closed for user asterisk
mar 6 21:29:40 linux-1 su(pam_unix)[21484]: session opened for user asterisk by (uid=0)
mar 6 21:29:40 linux-1 su(pam_unix)[21484]: session closed for user asterisk
Mar 6 21:30:01 linux-1 kernel: zaphfc: bchan rx fifo not enough bytes to receive! (z1=528, z2=527, wanted 8 got 2), probably a buffer overrun.
Mar 6 21:30:49 linux-1 kernel: zaphfc: bchan rx fifo not enough bytes to receive! (z1=528, z2=527, wanted 8 got 2), probably a buffer overrun.
Mar 6 21:32:26 linux-1 last message repeated 2 times
Mar 6 21:34:03 linux-1 last message repeated 2 times
Mar 6 21:35:40 linux-1 last message repeated 2 times
My /etc/zaptel.conf: # hfc-s pci a span definition # most of the values should be bogus because we are not really zaptel loadzone=nl defaultzone=nl span=1,1,3,ccs,ami bchan=1-2 dchan=3
My zapata.conf: ; ; Zapata telephony interface ; ; Configuration file
[channels] ; ; Default language ; ;language=en ; ; Default context ; ; switchtype = euroisdn ; p2mp TE mode ;signalling = bri_cpe_ptmp ; p2p TE mode ;signalling = bri_cpe ; p2mp NT mode ;signalling = bri_net_ptmp ; p2p NT mode signalling = bri_net pridialplan = local ;prilocaldialplan = local ; nationalprefix = 0 ;internationalprefix = 00 ; trust user provided callerid (clip no screening)? ;pritrustusercid = no echocancel=yes ;echotraining = 100 ;echocancelwhenbridged=yes immediate=yes group = 1 context=outbound-trunks channel => 1-2
Asterisk console while trying to use the dial out trunk:
Mar 6 21:40:01 DEBUG[21452]: Setting NAT on RTP to 0
Mar 6 21:40:01 DEBUG[21452]: Stopping retransmission on '[EMAIL PROTECTED]' of Response 101: Found
Mar 6 21:40:01 DEBUG[21452]: Setting NAT on RTP to 0
Mar 6 21:40:01 DEBUG[21452]: Check for res for 200
Mar 6 21:40:01 DEBUG[21452]: Call from user '200' is 1 out of 0
Mar 6 21:40:01 DEBUG[21452]: build_route: Contact hop: Roser Roca <sip:[EMAIL PROTECTED]:5061>
Mar 6 21:40:01 VERBOSE[21452]: -- Executing Macro("SIP/200-1cf6", "dialout-default|9639712471") in new stack
Mar 6 21:40:01 WARNING[21452]: ast_yyerror(): syntax error: parse error; Input:
fooEl Serrat = foo
^^^^^
^
Mar 6 21:40:01 DEBUG[21452]: Expression is 'fooEl'
Mar 6 21:40:01 VERBOSE[21452]: -- Executing GotoIf("SIP/200-1cf6", "fooEl?4") in new stack
Mar 6 21:40:01 DEBUG[21452]: Not taking any branch
Mar 6 21:40:01 VERBOSE[21452]: -- Executing SetCallerID("SIP/200-1cf6", "El Serrat") in new stack
Mar 6 21:40:01 VERBOSE[21452]: -- Executing Goto("SIP/200-1cf6", "6") in new stack
Mar 6 21:40:01 VERBOSE[21452]: -- Goto (macro-dialout-default,s,6)
Mar 6 21:40:01 VERBOSE[21452]: -- Executing Dial("SIP/200-1cf6", "ZAP/g0/9639712471") in new stack
Mar 6 21:40:01 NOTICE[21452]: Unable to create channel of type 'ZAP'
Mar 6 21:40:01 VERBOSE[21452]: == Everyone is busy/congested at this time
Mar 6 21:40:01 DEBUG[21452]: Exiting with DIALSTATUS=CHANUNAVAIL.
Mar 6 21:40:01 VERBOSE[21452]: -- Executing Macro("SIP/200-1cf6", "outisbusy") in new stack
Mar 6 21:40:01 VERBOSE[21452]: -- Executing Playback("SIP/200-1cf6", "allison7/all-circuits-busy-now") in new stack
Mar 6 21:40:01 DEBUG[21452]: Ooh, format changed from unknown to ulaw
Mar 6 21:40:01 DEBUG[21452]: Scheduling timer at 160 sample intervals
Mar 6 21:40:01 VERBOSE[21452]: -- Playing 'allison7/all-circuits-busy-now' (language 'en')
Mar 6 21:40:01 DEBUG[21452]: Stopping retransmission on '[EMAIL PROTECTED]' of Response 102: Found
Mar 6 21:40:03 DEBUG[21452]: Scheduling timer at 0 sample intervals
Mar 6 21:40:03 DEBUG[21452]: Scheduling timer at 0 sample intervals
Mar 6 21:40:03 VERBOSE[21452]: -- Executing Playback("SIP/200-1cf6", "allison7/pls-try-call-later") in new stack
Mar 6 21:40:03 DEBUG[21452]: Scheduling timer at 160 sample intervals
Mar 6 21:40:03 VERBOSE[21452]: -- Playing 'allison7/pls-try-call-later' (language 'en')
Mar 6 21:40:05 DEBUG[21452]: Scheduling timer at 0 sample intervals
Mar 6 21:40:05 DEBUG[21452]: Scheduling timer at 0 sample intervals
Mar 6 21:40:05 VERBOSE[21452]: -- Executing Macro("SIP/200-1cf6", "hangupcall") in new stack
Mar 6 21:40:05 VERBOSE[21452]: -- Executing ResetCDR("SIP/200-1cf6", "w") in new stack
Mar 6 21:40:05 DEBUG[21452]: cdr_mysql: inserting a CDR record.
Mar 6 21:40:05 DEBUG[21452]: cdr_mysql: SQL command as follows: INSERT INTO cdr (calldate,clid,src,dst,dcontext,channel,dstchannel,lastapp,lastdata,duration,billsec,disposition,amaflags,accountcode) VALUES ('2005-03-06 21:40:01','El Serrat','200','9639712471','from-internal', 'SIP/200-1cf6','','ResetCDR','w',4,4,'ANSWERED',3,'')
Mar 6 21:40:05 VERBOSE[21452]: -- Executing NoCDR("SIP/200-1cf6", "") in new stack
Mar 6 21:40:05 WARNING[21452]: CDR on channel 'SIP/200-1cf6' not posted
Mar 6 21:40:05 WARNING[21452]: CDR on channel 'SIP/200-1cf6' lacks end
Mar 6 21:40:05 VERBOSE[21452]: -- Executing Wait("SIP/200-1cf6", "5") in new stack
Mar 6 21:40:06 VERBOSE[21452]: == Spawn extension (macro-hangupcall, s, 3) exited non-zero on 'SIP/200-1cf6' in macro 'hangupcall'
Mar 6 21:40:06 VERBOSE[21452]: == Spawn extension (macro-outisbusy, s, 3) exited non-zero on 'SIP/200-1cf6' in macro 'outisbusy'
Mar 6 21:40:06 VERBOSE[21452]: == Spawn extension (macro-dialout-default, s, 107) exited non-zero on 'SIP/200-1cf6' in macro 'dialout-default'
Mar 6 21:40:06 VERBOSE[21452]: == Spawn extension (from-internal, 9639712471, 1) exited non-zero on 'SIP/200-1cf6'
Mar 6 21:40:06 VERBOSE[21452]: -- Executing Macro("SIP/200-1cf6", "hangupcall") in new stack
Mar 6 21:40:06 VERBOSE[21452]: -- Executing ResetCDR("SIP/200-1cf6", "w") in new stack
Mar 6 21:40:06 VERBOSE[21452]: -- Executing NoCDR("SIP/200-1cf6", "") in new stack
Mar 6 21:40:06 VERBOSE[21452]: -- Executing Wait("SIP/200-1cf6", "5") in new stack
Mar 6 21:40:06 VERBOSE[21452]: == Spawn extension (macro-hangupcall, s, 3) exited non-zero on 'SIP/200-1cf6' in macro 'hangupcall'
Mar 6 21:40:06 VERBOSE[21452]: == Spawn extension (from-internal, h, 1) exited non-zero on 'SIP/200-1cf6'
Mar 6 21:40:06 DEBUG[21452]: update_user_counter(200) - decrement inUse counter
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users