On Wed, 9 Mar 2005, bagattin jerome wrote: > Hi, > > I try to connect my asterisk box with a classic pbx > (Siemens). > I have a T100P E1 card.
The T100P is a T1 card, not an E1. Did you mean to write E100P? > modprobe zaptel and wct1xxp ok > ztcfg -vv ok > > I can run asterisk and show the channels but the led > still flash red > > My zaptel.conf : > > span=1,1,0,ccs,hdb3,crc4 > bchan=1-15 > bchan=17-31 > dchan=16 Is the pbx set to provide timing? If not, you need to change to span=1,0,0.... Also, check that crc4 is enabled on the pbx as well. Peter _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users