On Fri, 11 Mar 2005, James Bean wrote: > Hi, I hope someone can help me with this.... > > Asterisk 1.0.6 Zaptel 1.0.6 Libpri 1.0.6, 1 Digium E100P card installed > Panasonic TDA200 firmware v2.0.6 E1 Card Firmware 1.0.2 > > System is located in Australia, so as technologies go, I believe it is > twist on the euro standard for the E1 signalling.
Is the E1 card an isdn card or something else? There are a several signalling systems that can run over an E1. > If I use span=1,x,0,ccs,hdb3 where x =0,1,2 the sync light appears on > the E100P card but when i bring the TDA E1 card in service i get a sync > error and a crap load of Red Alerts for every channel and a > > Mar 11 14:40:35 NOTICE[3910]: chan_zap.c:7395 pri_dchannel: PRI got event: No > more alarm (5) on Primary D-channel of span 1 > Mar 11 14:40:35 WARNING[3910]: chan_zap.c:1931 pri_find_dchan: No D-channels > available! Using Primary on channel anyway 16! > > At this stage I was pulling hair thinking what the.... but since > murphy's law rules supreme i started thinking about other signalling > types, esf,b8zs is definitely not going to work so I tried..... > > span=1,x,0,cas,hdb3 and suddenly i get across the board green lights on > the E100P and the TDA E1, but once the sync actually completes I then > get the same red alert's on every channel including the above d-channel > error. When running cas you do not have a D channel for the signalling. Instead each voice channel has a few dedicated bits in channel 16 (hence Channel Associated Signalling). This is used for E&M, loopstart etc and is incompatible with the ISDN signalling that you tried. > cas,hdb3 seems to be the way to go, although not generally used by what > i have read on the net, but after sync it bombs out in asterisk, does > anyone have any clues of what I could try next. > > I tried all instances swapping between pri_net and pri_cpe in the > zapata.conf You need to tell us more about what card you have in the Panasonic PBX. Peter _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users