Do you have an 's' extention in the default context ?
Marco.
Dimitris Kounalakis wrote:
Hello,
I am trying to configure asterisk 1.0.7pre to get incoming calls from an ISDN line using an AVM fritz PCI 2.0 with Chan_capi 0.3.5. My problem is that the context is not recognised in the /etc/asterisk/capi.conf
I have in /etc/asterisk/capi.conf 's section "[interfaces]" the following directive
context=isdn
and the following directive in /etc/asterisk/extensions.conf in the context [isdn]
[isdn]
exten => s,1,Dial(SIP/${DNID:4},60,tr)
Here follows the debug info I get when an incoming call starts:
----------------------------------------------------------------------------
== CONNECT_IND (PLCI=0x101,DID=2810111694,CID=2810111694,CIP=0x1,CONTROLLER=0x1)
-- creating pipe for PLCI=0x101 msn = 2810111694
> sent ALERT_REQ PLCI = 0x101
== Starting CAPI[contr1/2810111694]/3 at ,2810111694,1 failed so falling back to exten 's'
== Starting CAPI[contr1/2810111694]/3 at ,s,1 still failed so falling back to context 'default'
Mar 13 11:52:41 WARNING[10744]: pbx.c:1893 ast_pbx_run: Channel 'CAPI[contr1/2810111694]/3' sent into invalid extension 's' in context 'default', but no invalid handler
-- CAPI Hangingup
-----------------------------------------------------------------------------
When I move the "exten => s,1,Dial(${DNID:4},60,tr)" in the context "[default]" of the /etc/asterisk/extensions.conf, I get the following debug info and the sip phone rings ok:
------------------------------------------------------------------------------
== CONNECT_IND (PLCI=0x101,DID=2810111694,CID=2810111694,CIP=0x1,CONTROLLER=0x1)
-- creating pipe for PLCI=0x101 msn = 2810111694
> sent ALERT_REQ PLCI = 0x101
== Starting CAPI[contr1/2810111694]/4 at ,2810111694,1 failed so falling back to exten 's'
== Starting CAPI[contr1/2810111694]/4 at ,s,1 still failed so falling back to context 'default'
-- Executing Dial("CAPI[contr1/2810111694]/4", "SIP/111694|60|tr") in new stack
-- Called 111694
------------------------------------------------------------------------------
Is this a bug? It does not handle the context, so, it can not find what to do, it works only with the default context.
Thank you in advance, Dimitris _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users