[EMAIL PROTECTED] (Kevin P. Fleming) writes: > Well, incoming call handling on SPA-3000 kind of sucks at the > moment... but I don't see how it could be configured to ring a bunch > of phones anyway. At best it can deliver the call to a single > gateway/proxy, and even it really wants to answer the line first and > present a second dial tone to the caller before doing so. If the call > is just going to go into an Asterisk server for routing to "ring all > the phones", then IMO it'd just be easier to skip the SPA-3000 > completely.
It isn't hard to make an incoming POTS call to the spa-3k ring all the phones. 1) set up an extension that rings all the phones. exten => 6666,1,Dial(sip/6001&sip/6002&sip/6003&sip/6004&..sip/N) Have the spa3k use an "S0" dialplan: PSTN Line: ... Dial Plan 8: (S0 <:6666> ) ... PSTN Caller Default DP: 8 Too bad the spa3k software lacks a way to save a dialplan or to diff it against factory defaults. It makes it kind of hard to post a definitive recipe. -wolfgang -- Wolfgang S. Rupprecht http://www.wsrcc.com/wolfgang/ _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users