> > If you are outside the US, there isn't much you can do since the x100p > > card was specifically designed to operate with US 600 ohm impedance > > pstn lines. > > > > If you have a x100p clone, it is likely the problem. Replace it with > > something capable of matching the pstn impedance for whatever country > > you are located in. > > > > Loading wcfxo with option opermode=1 should select CTR21 mode, which > according to wcfxo.c (in zaptel) should be used in Austria, Belgium, > Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, > Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, > and UK. The default is to use FCC mode, which is used in the US.
The x100p does not have a programable chipset for impedance matching. That parameter was intended for the TDM card. _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users