I cant seem to be able to figure this out. As much as I can tell it is a codec problem.
I can dial out to [EMAIL PROTECTED] and the "Call Me" test there rings my phone. However when the callee endpoint answers, there is a failure to translate: Outgoing Call for 612 612 is not a local user -- Called [EMAIL PROTECTED] No path to translate from SIP/fwdpulvercom-dd5a(2) to Phone/phone0(1) (Provisional) Stopping retransmission (but retaining packet) on '[EMAIL PROTECTED]' Request 102: Found (Provisional) Stopping retransmission (but retaining packet) on '[EMAIL PROTECTED]' Request 102: Found -- SIP/fwdpulvercom-dd5a is ringing Unable to handle indication 3 for 'Phone/phone0' Scheduled a registration timeout # 100 Acked pending invite 102 Stopping retransmission on '[EMAIL PROTECTED]' of Request 102: Found build_route: Record-Route hop: <sip:[EMAIL PROTECTED];ftag=as3d6e380d;lr=on> build_route: Contact hop: <sip:[EMAIL PROTECTED]:5028> -- SIP/fwdpulvercom-dd5a answered Phone/phone0 No path to translate from Phone/phone0(1) to SIP/fwdpulvercom-dd5a(2) Had to drop call because I couldn't make Phone/phone0 compatible with SIP/fwdpulvercom-dd5a update_user_counter(612) - decrement outUse counter I have a Quicknet Lite ISA card. my phone.conf contains: mode=dialtone ;format=slinear format=g723.1 echocancel=medium silencesupression=yes device => /dev/phone0 my sip.conf contains: context=default ; Default context for incoming calls port=5060 ; UDP Port to bind to (SIP standard port is 5060) bindaddr=0.0.0.0 ; IP address to bind to (0.0.0.0 binds to all) srvlookup=yes ; Enable DNS SRV lookups on outbound calls disallow=all allow=gsm allow=ulaw allow=alaw maxexpirey=180 defaultexpirey=160 tos=reliability register => 6XXXX:[EMAIL PROTECTED] [fwdout] type=friend username=6XXXX secret=mypasswd host=fwd.pulver.com [fwdin] type=peer host=fwd.pulver.com context=default nat=yes canreinvite=no my extensions.conf contains: [globals] CONSOLE=Phone/phone0 [default] exten => _XXX,1,Dial(SIP/[EMAIL PROTECTED]) exten => s,1,Dial(Phone/phone0) Is it possible to call FWD using the Quicknet card? Thanks for any help _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users