I'll be damned. thats it.
I have no clue what I had before that made it work. I pulled that config right off of a site that said it would work like this. Changing [202] on the first one to [202-out] and boom it works.
thanks a bunch for pointing out the obvious.
MF Hulber wrote:
Is it correct to have the same context (202) listed twice in sip.conf?
Courtney Couch wrote:
I have Polycom ip-300 phones that worked yesterday but dont seem to work today (at least dtmf signalling once connected to the asterisk box)
The current configuration is:
[general] port = 5060 bindaddr = 0.0.0.0 context = test srvlookup = yes dtmf = inband allow = all dtmfmode=inband progressinband=no disallow=all allow=ulaw pedantic=no
[202]
type=user
secret=xxxx
context=test
mailbox=202
host=dynamic
[202] type=peer context=test secret=xxxx dtmfmode=rfc2833 username=Bob disallow=all allow=ulaw progressinband=no host=dynamic mailbox=202 up contacts in a database. Click on Web Address Book callerid="Bob" 202 host=dynamic
and in extensions:
[test] exten => s,1,Answer() exten => s,2,Backtround(menu) exten => s,3,Hangup() exten => 2,1,Playback(success) exten => 2,2,Goto(test,s,1)
(test context created specifically so i can test this dtmf problem)
Then in the console here is what I see:
Executing Answer("SIP/201-3db8", "") in new stack Launching 'BackGround' -- Executing BackGround("SIP/202-3db8", "menu") in new stack Set channel SIP/201-3db8 to write format gsm -- Playing 'menu' (language 'en') Urgent handler Sending dtmf: 51 (3), at 192.168.0.101 Sending dtmf: 50 (2), at 192.168.0.101 Sending dtmf: 52 (4), at 192.168.0.101 Sending dtmf: 49 (1), at 192.168.0.101 Sending dtmf: 48 (0), at 192.168.0.101 Sending dtmf: 55 (7), at 192.168.0.101 Got RTCP report of 80 bytes Sending dtmf: 42 (*), at 192.168.0.101 Sending dtmf: 50 (2), at 192.168.0.101 Sending dtmf: 49 (1), at 192.168.0.101 Sending dtmf: 48 (0), at 192.168.0.101 Sending dtmf: 55 (7), at 192.168.0.101 Sending dtmf: 52 (4), at 192.168.0.101 Sending dtmf: 50 (2), at 192.168.0.101 Sending dtmf: 42 (*), at 192.168.0.101 Sending dtmf: 55 (7), at 192.168.0.101
It doesnt respond to anything!
Not sure what to do. The signalling is the same as told by any config guides for the Polycom phones, and this was working earlier. I also dont have the CVS-HEAD or anything that silly.
any advice would be much apreciated.
thanks!
-C
_______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
