Thanks!
I've edited /etc/zaptel.conf to be fxoks=4
and then ran
[EMAIL PROTECTED]:~# more /proc/interrupts
CPU0 CPU1 0: 59746 18994 IO-APIC-edge timer
1: 8 0 IO-APIC-edge i8042
7: 0 0 IO-APIC-edge parport0
9: 0 0 IO-APIC-level acpi
17: 42 1 IO-APIC-level eth1
18: 1568 75 IO-APIC-level aic7xxx, aic7xxx
19: 920 0 IO-APIC-level uhci_hcd, eth0
NMI: 0 0
LOC: 78599 78598
ERR: 0
MIS: 0
[EMAIL PROTECTED]:~# modprobe wcfxo
ZT_CHANCONFIG failed on channel 4: No such device or address (6)
FATAL: Error running install command for wcfxo
[EMAIL PROTECTED]:~# more /proc/interrupts
CPU0 CPU1 0: 68597 18994 IO-APIC-edge timer
1: 8 0 IO-APIC-edge i8042
7: 0 0 IO-APIC-edge parport0
9: 0 0 IO-APIC-level acpi
17: 42 1 IO-APIC-level eth1
18: 1710 75 IO-APIC-level aic7xxx, aic7xxx
19: 1112 0 IO-APIC-level uhci_hcd, eth0
NMI: 0 0
LOC: 87452 87451
ERR: 0
MIS: 0
[EMAIL PROTECTED]:~# ztcfg -vvv
Zaptel Configuration ====================== Channel map: Channel 04: FXO Kewlstart (Default) (Slaves: 04) 1 channels configured. ZT_CHANCONFIG failed on channel 4: No such device or address (6)
I guess my hunch of the system not seeing the card might be the right track.
administrator tootai wrote:
Russell Handorf a �crit :
Greetings all,
I addressed the issue below with editing the .config file in my 2.6.10 source file by adding
CONFIG_CRC_CCITT=m
recompiled, and now I can modprobe wcfxs and zaptel without any errors, and ztctl -vvv shows
Channel 04: FXS Kewlstart (Default) (Slaves: 04)
You have an fxo module: so it's wcfxo (stable branch) that you have to load (wctdm if you're using CVS)
_______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
