Hello,
I would like to test the capabilities of the various hardware that I run AstLinux on:
- Soekris Net4801 (266mhz Geode) - 1ghz P3 - 1ghz Via C3 - 2.5ghz Celeron - 3 ghz x 2 Xeon
What I would like to do is use * on the higher end machines to pound as many calls as possible (probably 10, 20 at a time) into * on the lesser machines. I will then try to keep track of system resources (CPU usage, memory usage, etc) on the "client" machines. I want to do this with various codecs, jitterbuffer yes/no, trunk yes/no, SIP, IAX, across all of this hardware to at least get an idea of what I can expect from these CPU's (as far as transcoding goes). "show translations" is just not cutting it anymore... :)
Not to self-promote, but AstLinux looks like a perfect platform to do testing like this because of consistency and the fact that it can run from flash and RAM, so disk I/O should not ever be a problem...
I am thinking some combination of app_milliwatt & the outgoing call spool or manager interface would be a good way to go about this. The wiki page has no specifics for doing this, so I thought I would ask. How is this normally done, or is there a completely different, better way to do it?
Thanks in advance!
-- Kristian Kielhofner _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
