I have seen that before when you mismatch the type of pri flavor. For example, if you carrier gives you 4ess and you put 5ess in your config. There are subtle differences in packets. I would check the configuration on your carrier side and * side.
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Richard Sent: Saturday, April 02, 2005 1:20 PM To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: [Asterisk-Users] problem detecting answer on pri card Hi, I have a digium PRI T1 card connecting to my carrier. However it has problems to detect the answer signal on some numbers. For example, 1-800-225-2525 is KLM airline's reservation line. It should answer right away. But * can't detect it is answered and keeps ringing the ip phone. I put a monitor on the channel, and get the answer messages in the channels. So somehow the line is answered but * doesn't know. I don't have a problem to most numbers. The problem only got my attention after one customer reported it. A debug on the pri shows, Ext: 1 Progress Description: Call is not end-to-end ISDN; further call progress information may be available inband. (1) ] So maybe the inband information is not detected by *? Anyone has the same setup, i.e. PRI to your carrier? Can you please dial the number 1-800-225-2525 and have 'pri debug'? I'd like to compare the results. I am not sure if it is * or just my * configuration. Your help is highly appreciated. I am really stuck here. Thanks, Richard _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users