I had a simliar problem with my C-302P SIP phones until I added
"dtmfmode=rfc2833" to my sip.conf
Ian Pattison wrote:
Hi All,
I've got a couple of AriaVoice C-301P SIP phones connecting to * and have a bit of a problem. I can dial out with no problem but once * bridges the call to another channel (such as a Zap channel to the PSTN or an internal Analog phone) it appears that the keypad is then disabled which keeps me from navigating other peoples IVR trees. I've seen some ramblings on DTMF relay (usually when applied to Cisco products) but don't know if that's my issue at all. I've tried both RFC2833 and Inband Audio for DTMF handling with identical results. It literally appears that the keypad is being disabled after dialling.
I've attempted to contact the vendor of the phones several times and have been
unsuccessful in reaching anyone.
Anyone had a similar experience?
A snapshot of the phone's config can be seen at http://www.technologyassociates.ca/phone.jpg
Thanks,
Ian
Ian Pattison, Senior Analyst
Technology Associates Inc.
Tel: 905-459-2100 ext. 204
Mobile: 416-568-6548
E-mail: [EMAIL PROTECTED]
------------------------------------------------------------------------
BEGIN:VCARD
VERSION:2.1
N:Pattison;Ian
FN:Ian Pattison
ORG:Technology Associates Inc.
ADR:;;9052 Creditview Rd.;Brampton;Ontario;L6V 1A1;Canada
TEL;WORK:416-657-2464
TEL;WORK:905-459-2100
TEL;CELL:416-568-6548
EMAIL:[EMAIL PROTECTED]
END:VCARD
------------------------------------------------------------------------
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users