Looking for some help any way I can. I've been closely following digium's troubleshooting steps and seem to be okay there. I am connecting, via PRI, to a Definity system. When I release the board on the Definity side I get this in Asterisk:
*CLI> Apr 7 10:17:23 NOTICE[13099]: chan_zap.c:7395 pri_dchannel: PRI got event: HDLC Abort (6) on Primary D-channel of span 1 Apr 7 10:17:23 NOTICE[13099]: chan_zap.c:7395 pri_dchannel: PRI got event: HDLC Abort (6) on Primary D-channel of span 1 Apr 7 10:17:23 NOTICE[13099]: chan_zap.c:7395 pri_dchannel: PRI got event: HDLC Abort (6) on Primary D-channel of span 1 Apr 7 10:17:23 NOTICE[13099]: chan_zap.c:7395 pri_dchannel: PRI got event: HDLC Abort (6) on Primary D-channel of span 1 Apr 7 10:17:23 NOTICE[13099]: chan_zap.c:7395 pri_dchannel: PRI got event: HDLC Abort (6) on Primary D-channel of span 1 Apr 7 10:17:23 NOTICE[13099]: chan_zap.c:7395 pri_dchannel: PRI got event: HDLC Abort (6) on Primary D-channel of span 1 Apr 7 10:17:23 NOTICE[13099]: chan_zap.c:7395 pri_dchannel: PRI got event: HDLC Abort (6) on Primary D-channel of span 1 Apr 7 10:17:48 NOTICE[13099]: chan_zap.c:7395 pri_dchannel: PRI got event: HDLC Abort (6) on Primary D-channel of span 1 Apr 7 10:17:48 NOTICE[13099]: chan_zap.c:7395 pri_dchannel: PRI got event: HDLC Abort (6) on Primary D-channel of span 1 Apr 7 10:17:48 NOTICE[13099]: chan_zap.c:7395 pri_dchannel: PRI got event: HDLC Abort (6) on Primary D-channel of span 1 Apr 7 10:17:48 NOTICE[13099]: chan_zap.c:7395 pri_dchannel: PRI got event: HDLC Abort (6) on Primary D-channel of span 1 Apr 7 10:17:48 NOTICE[13099]: chan_zap.c:7395 pri_dchannel: PRI got event: HDLC Abort (6) on Primary D-channel of span 1 Apr 7 10:17:48 NOTICE[13099]: chan_zap.c:7395 pri_dchannel: PRI got event: HDLC Abort (6) on Primary D-channel of span 1 Apr 7 10:17:48 NOTICE[13099]: chan_zap.c:7395 pri_dchannel: PRI got event: HDLC Abort (6) on Primary D-channel of span 1 I've spent about 30 hours so far troubleshooting this problem to no avail with Digium and Avaya. I followed the wiki instruction to start with and have been tweaking and recompiling since then. I tried direct wiring and also using the csu from Avaya. Started with the latest from CVS and have cleaned up and gone back to the stable cvs release. Any advice would be much appreciated! The avaya side says the d-channel is out of service. Configs: /etc/zaptel.conf Loadzone=us defaultzone=us span=1,1,0,d4,b8zs bchan=1-4 #number of channels (Yes I'm only using 4 channels for now) dchan=24 #dchannel /etc/asterisk/zapata.conf [channels] context=default signalling=pri_net switchtype=national ;echocancel=yes ;echocancelwhenbridged=yes ;echotraining=400 callerid=asreceived group=1 channel=>1-4 overlapdial=yes _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
