I'm a Voip carrier and we support T38 calls. If you need T38 Faxing
Please contact me
[EMAIL PROTECTED]
Mike
Steve Underwood wrote:
Asterisk needs more than to just allow T.38 as a codec type. T.38 only
recently gained an RTP option, and very few things support it so far.
You need to have a UDPTL transport for most boxes supporting T.38. I
have a working UDPTL for *, but it needs more polishing before release.
Regards,
Steve
Mark Dutton wrote:
Right you are Michael.
I have some Multitech MVP200s and they do work indeed. Only problem
is mine
are too old to do SIP. I know Asterisk does not do T.39 but as it
only needs
to ALLOW the codec when devices are communicating with each other, it
can't
be too hard to get working. Perhaps the t39fax codec needs to be
added to
the Asterisk codec list so it knows about it and then it can be added
to the
allow list in SIP.
Mark
Date: Thu, 07 Apr 2005 21:17:03 -0700
From: Michael D Schelin <[EMAIL PROTECTED]>
Subject: Re: [Asterisk-Users] T.38 fax with SIP devices
To: Scott Wolfe <[EMAIL PROTECTED]>, Asterisk Users Mailing List -
Non-Commercial Discussion <asterisk-users@lists.digium.com>
Message-ID: <[EMAIL PROTECTED]>
Content-Type: text/plain; charset="us-ascii"
Hello, The Multitech VOIP line supports T38 and I have tested it. It
works
great. You will need a public IP to make it work. Very expensive
though.
T38 Is not compatible with Asterisk.
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users