On Saturday 16 April 2005 09:33, Tim Robinson wrote: > So I do not believe power is the issue...I strongly suspect you need the > 100 ohm terminators and you need to check that your ISDN BRI crossover > cable is wired correctly. i.e. the RX pins on one RJ45 connect to the > TX pins of the other. Have a look at
Tim that's just what I wanted to hear :) I'd rather do a dodgy 'wrapping CAT5 strands around resistors' effort than mess about with powered NT1s :)) I know the cables themselves are wired correctly because our local PBX support made them, and they work perfectly when plugged into a real BT ISDN2e wallbox =) So, I'll pop down to Maplin on Monday and find myself some resistance :) Cheers, Gavin. _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users