Ok... here's my module loading process... am I missing something? modprobe zaptel modprobe wcfxs boostringer=1 (btw: this one takes about 5 seconds. The others are almost instant) modprobe wcfxo ztcfg -vv
This is correct is it not? >>> "Robert Webb" <[EMAIL PROTECTED]> 18/04/2005 16:06 >>> See inline responses... On Mon, 18 Apr 2005 10:43:30 -0400 "Ian Pattison" <[EMAIL PROTECTED]> wrote: > 2. Low ringing voltage still (~44V AC). I have used the >boostringer=1 option when loading wcfxs, did I miss >something at compile time? The reason you are still seeing low ring voltage is due to the fact that the module is not using the boostringer when it is being loaded. If it were, you would see PCI: Found IRQ 14 for device 00:08.0 Freshmaker version: 71 Freshmaker passed register test Boosting ringinger on slot 1 (89V peak) Module 0: Installed -- AUTO FXS/DPO Module 1: Not installed Module 2: Not installed Module 3: Installed -- AUTO FXO (FCC mode) Found a Wildcard TDM: Wildcard TDM400P REV E/F (4 modules) Registered tone zone 0 (United States / North America) Notice the line in there about bossting the ringer to 89V peak. I am not seeing that in yours. _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users