Thanks Rob, Robert and Tim,
the issue, in fact, the group keyword in zapata.conf.
Best regards. Jaime
From: "Tim Touhsaent" <[EMAIL PROTECTED]>
Reply-To: Asterisk Users Mailing List - Non-Commercial Discussion <asterisk-users@lists.digium.com>
To: "Asterisk Users Mailing List - Non-Commercial Discussion" <asterisk-users@lists.digium.com>
Subject: Re: [Asterisk-Users] Unable to create channel of type 'Zap'
Date: Wed, 20 Apr 2005 15:38:31 -0400
MIME-Version: 1.0
X-Originating-IP: [64.9.40.49]
X-Originating-Email: [EMAIL PROTECTED]
X-Sender: [EMAIL PROTECTED]
Received: from lists.digium.com ([69.16.138.164]) by mc11-f30.hotmail.com with Microsoft SMTPSVC(6.0.3790.211); Wed, 20 Apr 2005 18:23:03 -0700
Received: from [69.16.138.164] (localhost [127.0.0.1])by lists.digium.com (Postfix) with ESMTPid 915467C443; Wed, 20 Apr 2005 19:12:22 -0500 (CDT)
Received: from psmtp.com (exprod5mx119.postini.com [64.18.0.33])by lists.digium.com (Postfix) with SMTP id B9F632FE852for <asterisk-users@lists.digium.com>;Wed, 20 Apr 2005 14:38:23 -0500 (CDT)
Received: from source ([64.4.47.8]) by exprod5mx119.postini.com ([64.18.4.10])with SMTP; Wed, 20 Apr 2005 13:38:31 MDT
Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC;Wed, 20 Apr 2005 12:38:31 -0700
Received: from 64.9.40.49 by BAY9-DAV8.phx.gbl with DAV;Wed, 20 Apr 2005 19:38:30 +0000
X-Message-Info: N4u0pqWW+O0aUaWu/93BrasPa2p97Lw4rlBTRL4dd1U=
X-Original-To: asterisk-users@lists.digium.com
Delivered-To: asterisk-users@lists.digium.com
References: <[EMAIL PROTECTED]>
X-MSMail-Priority: Normal
X-Mailer: Microsoft Outlook Express 6.00.2800.1106
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1106
X-OriginalArrivalTime: 20 Apr 2005 19:38:31.0041 (UTC)FILETIME=[8839D710:01C545E0]
X-pstn-levels: (S:99.90000/99.90000 )
X-pstn-settings: 1 (0.1500:0.1500) gt3 gt2 gt1 X-pstn-addresses: from <[EMAIL PROTECTED]> [90/4] X-BeenThere: asterisk-users@lists.digium.com
X-Mailman-Version: 2.1.5
Precedence: list
List-Id: Asterisk Users Mailing List - Non-Commercial Discussion<asterisk-users.lists.digium.com>
List-Unsubscribe: <http://lists.digium.com/mailman/listinfo/asterisk-users>,<mailto:[EMAIL PROTECTED]>
List-Archive: <http://lists.digium.com/pipermail/asterisk-users>
List-Post: <mailto:asterisk-users@lists.digium.com>
List-Help: <mailto:[EMAIL PROTECTED]>
List-Subscribe: <http://lists.digium.com/mailman/listinfo/asterisk-users>,<mailto:[EMAIL PROTECTED]>
Errors-To: [EMAIL PROTECTED]
Return-Path: [EMAIL PROTECTED]
To help you out i will post my config files... The only problem that i have is in an active call i can't get my phones to send responses to voice menus such as dialling the voicemailmain cmd.
I am using a TDM04b card with four ports instead of one my zapata.conf file looks like:
[trunkgroups]
[channels]
;this block is standard features of the anolog lines musiconhold=default rxwink=300 ; seems to use long winks usecallerid=yes hidecallerid=no callerid="Berkleigh Computer Systems" Callwaiting=yes busydetect=no callprogress=no usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes echotraining=800 rxgain=3.3 ; the gain options are volume adjustments (recieve&transmit) txgain=3.3
group=0 callgroup=1 pickupgroup=1 immediate=no faxdetect=no
signalling=fxs_ks ;fxo cards use fxs signalling callerid=asrecieved context=default ; context in extensions.conf to use channel=>1-4 ; we have four availlable ports on our card
and my zaptel.conf has:
fxsks=1-4 defaultzone=us loadzone=us
the only difference should be that you should have 1 instead of 1-4 in both
zapata and zaptel. as far as the extensions.conf i had issues with trying to
work with the demo file and just wrote my own, I found it easier, what you
prefer is your choice.
Tim Touhsaent Berkleigh Computer Systems Kutztown, PA
----- Original Message ----- From: "Jaime Blanco" <[EMAIL PROTECTED]> To: <asterisk-users@lists.digium.com> Sent: Wednesday, April 20, 2005 2:33 PM Subject: [Asterisk-Users] Unable to create channel of type 'Zap'
> Hi,
>
> I just installed the asterisk and the X100P card. I can receive calls
from
> PSTN and it can ring on a Grandstream SIP Phone. From the SIP Phone I can
> dial the demo extension on asterisk pbx. The issue is as soon as I try to
> dial out 92714756 or another number I received the following message:
>
> *CLI> -- Executing Dial("SIP/1001-2b93", "Zap/g2/2714756") in new
stack
> Apr 20 02:27:40 NOTICE[245776]: app_dial.c:536 dial_exec: Unable to create
> channel of type 'Zap'
> == Everyone is busy at this time
> -- Executing Congestion("SIP/1001-2b93", "") in new stack
> == Spawn extension (from-sip, 92714756, 2) exited non-zero on
> 'SIP/1001-2b93'
>
> Zapata.conf is:
>
> [channels]
> callwaiting=yes
> callwaitingcallerid=yes
> threewaycalling=yes
> transfer=yes
> cancallforward=yes
>
> echocancel=yes
> echocancelwhenbridged=no
>
> rxgain=0.0
> txgain=0.0
>
> immediate=no
>
> context=default
>
> signalling=fxs_ks
> channel=1
>
>
> extensions.conf
> ;
> ; Static extension configuration file, used by ; the pbx_config module.
This
> is where you configure all your ; inbound and outbound calls in Asterisk.
> ;
>
> ;
> ; The "General" category is for certain variables.
> ;
> [general]
> ;
> ; If static is set to no, or omitted, then the pbx_config will rewrite ;
> this file when extensions are modified. Remember that all comments ; made
> in the file will be lost when that happens.
> ;
> ; XXX Not yet implemented XXX
> ;
> static=yes
> ;
> ; if static=yes and writeprotect=no, you can save dialplan by ; CLI
command
> 'save dialplan' too ; writeprotect=no
>
> ; You can include other config files, use the #include command (without
the
> ';')
> ; Note that this is different from the "include" command that includes
> contexts within ; other contexts. The #include command works in all
asterisk
> configuration files.
> ;#include "filename.conf"
>
> ; The "Globals" category contains global variables that can be referenced
;
> in the dialplan with ${VARIABLE} or ${ENV(VARIABLE)} for Environmental
> variable ; ${${VARIABLE}} or ${text${VARIABLE}} or any hybrid ; [globals]
> CONSOLE=Console/dsp ; Console interface for
demo
> ;CONSOLE=Zap/1
> ;CONSOLE=Phone/phone0
> IAXINFO=guest ; IAXtel username/password
> ;IAXINFO=myuser:mypass
> TRUNK=Zap/g2 ; Trunk interface
> TRUNKMSD=1 ; MSD digits to strip
> (usually 1 or 0)
> ;TRUNK=IAX2/user:[EMAIL PROTECTED]
> ;
> ; Any category other than "General" and "Globals" represent ; extension
> contexts, which are collections of extensions.
> ;
> ; Extension names may be numbers, letters, or combinations ; thereof. If
an
> extension name is prefixed by a '_'
> ; character, it is interpreted as a pattern rather than a ; literal. In
> patterns, some characters have special meanings:
> ;
> ; X - any digit from 0-9
> ; Z - any digit from 1-9
> ; N - any digit from 2-9
> ; [1235-9] - any digit in the brackets (in this example,
1,2,3,5,6,7,8,9)
> ; . - wildcard, matches anything remaining (e.g. _9011. matches
> ; anything starting with 9011 excluding 9011 itself)
> ;
> ; For example the extension _NXXXXXX would match normal 7 digit dialings,
;
> while _1NXXNXXXXXX would represent an area code plus phone number ;
> preceeded by a one.
> ;
> ; Contexts contain several lines, one for each step of each ; extension,
> which can take one of two forms as listed below, ; with the first form
being
> preferred. One may include another ; context in the current one as well,
> optionally with a ; date and time. Included contexts are included in the
> order ; they are listed.
> ;
> ;[context]
> ;exten => someexten,priority,application(arg1,arg2,...)
> ;exten => someexten,priority,application,arg1|arg2...
> ;
> ; Timing list for includes is
> ;
> ; <time range>|<days of week>|<days of month>|<months>
> ;
> ;include => daytime|9:00-17:00|mon-fri|*|* ; ; ignorepat can be used to
> instruct drivers to not cancel dialtone upon ; receipt of a particular
> pattern. The most commonly used example is ; of course '9' like this:
> ;
> ;ignorepat => 9
> ; so that dialtone remains even after dialing a 9.
> ;
>
> ;
> ; Here are the entries you need to participate in the IAXTEL ; call
routing
> system. Most IAXTEL numbers begin with 1-700, but ; there are exceptions.
> For more information, and to sign ; up, please go to www.gnophone.com or
> www.iaxtel.com ; [iaxtel700] exten =>
> _91700NXXXXXX,1,Dial(IAX2/[EMAIL PROTECTED]/${EXTEN:[EMAIL PROTECTED])
>
> [iaxprovider]
> ;switch => IAX2/user:[EMAIL PROTECTED]/mycontext
>
> [trunkint]
> ;
> ; International long distance through trunk ; exten =>
> _9011.,1,Dial(${TRUNK}/${EXTEN:${TRUNKMSD}})
> exten => _9011.,2,Congestion
>
> [trunkld]
> ;
> ; Long distance context accessed through trunk ; exten =>
> _91NXXNXXXXXX,1,Dial(${TRUNK}/${EXTEN:${TRUNKMSD}})
> exten => _91NXXNXXXXXX,2,Congestion
>
> [trunklocal]
> ;
> ; Local seven-digit dialing accessed through trunk interface ; exten =>
> _9NXXXXXX,1,Dial(${TRUNK}/${EXTEN:${TRUNKMSD}})
> exten => _9NXXXXXX,2,Congestion
>
> [trunktollfree]
> ;
> ; Long distance context accessed through trunk interface ; exten =>
> _91800NXXXXXX,1,Dial(${TRUNK}/${EXTEN:${TRUNKMSD}})
> exten => _91800NXXXXXX,2,Congestion
> exten => _91888NXXXXXX,1,Dial(${TRUNK}/${EXTEN:${TRUNKMSD}})
> exten => _91888NXXXXXX,2,Congestion
> exten => _91877NXXXXXX,1,Dial(${TRUNK}/${EXTEN:${TRUNKMSD}})
> exten => _91877NXXXXXX,2,Congestion
> exten => _91866NXXXXXX,1,Dial(${TRUNK}/${EXTEN:${TRUNKMSD}})
> exten => _91866NXXXXXX,2,Congestion
>
> [international]
> ;
> ; Master context for international long distance ; ignorepat => 9 include
=>
> longdistance include => trunkint
>
> [longdistance]
> ;
> ; Master context for long distance
> ;
> ignorepat => 9
> include => local
> include => trunkld
>
> [local]
> ;
> ; Master context for local, toll-free, and iaxtel calls only ; ignorepat
=>
> 9 include => default include => parkedcalls include => trunklocal include
=>
> iaxtel700 include => trunktollfree include => iaxprovider ; ; You can use
an
> alternative switch type as well, to resolve ; extensions that are not
known
> here, for example with remote ; IAX switching you transparently get access
> to the remote ; Asterisk PBX ; ; switch =>
> IAX2/user:[EMAIL PROTECTED]/local
>
> [macro-stdexten];
> ;
> ; Standard extension macro:
> ; ${ARG1} - Extension (we could have used ${MACRO_EXTEN} here as well
> ; ${ARG2} - Device(s) to ring
> ;
> exten => s,1,Dial(${ARG2},20) ; Ring the
> interface, 20 seconds maximum
> exten => s,2,Voicemail(u${ARG1}) ; If
> unavailable, send to voicemail w/ unavail announce
> exten => s,3,Goto(default,s,1) ; If they
> press #, return to start
> exten => s,102,Voicemail(b${ARG1}) ; If busy,
> send to voicemail w/ busy announce
> exten => s,103,Goto(default,s,1) ; If they
> press #, return to start
>
>
> [demo]
> ;
> ; We start with what to do when a call first comes in.
> ;
> exten => s,1,Wait,1 ; Wait a second, just for fun
> exten => s,2,Answer ; Answer the line
> exten => s,3,DigitTimeout,5 ; Set Digit Timeout to 5 seconds
> exten => s,4,ResponseTimeout,10 ; Set Response Timeout to 10
seconds
> exten => s,5,BackGround(demo-congrats) ; Play a congratulatory message
> exten => s,6,BackGround(demo-instruct) ; Play some instructions
>
> exten => 2,1,BackGround(demo-moreinfo) ; Give some more information.
> exten => 2,2,Goto(s,6)
>
> exten => 3,1,SetLanguage(fr) ; Set language to french
> exten => 3,2,Goto(s,5) ; Start with the congratulations
>
> exten => 1000,1,Goto(default,s,1)
> ;
> ; We also create an example user, 1234, who is on the console and has ;
> voicemail, etc.
> ;
> exten => 1234,1,Playback(transfer,skip) ; "Please hold while..."
> ; (but skip if channel is not up)
> exten => 1234,2,Macro(stdexten,1234,${CONSOLE})
>
> exten => 1235,1,Voicemail(u1234) ; Right to voicemail
>
> exten => 1236,1,Dial(Console/dsp) ; Ring forever
> exten => 1236,2,Voicemail(u1234) ; Unless busy
>
> ;
> ; # for when they're done with the demo
> ;
> exten => #,1,Playback(demo-thanks) ; "Thanks for trying the
> demo"
> exten => #,2,Hangup ; Hang them up.
>
> ;
> ; A timeout and "invalid extension rule"
> ;
> exten => t,1,Goto(#,1) ; If they take too long, give up
> exten => i,1,Playback(invalid) ; "That's not valid, try again"
>
> ;
> ; Create an extension, 500, for dialing the ; Asterisk demo.
> ;
> exten => 500,1,Playback(demo-abouttotry); Let them know what's going on
> exten => 500,2,Dial(IAX2/[EMAIL PROTECTED]/[EMAIL PROTECTED]) ; Call the
> Asterisk demo
> exten => 500,3,Playback(demo-nogo) ; Couldn't connect to the demo
site
> exten => 500,4,Goto(s,6) ; Return to the start over
message.
>
> ;
> ; Create an extension, 600, for evaulating echo latency.
> ;
> exten => 600,1,Playback(demo-echotest) ; Let them know what's going on
> exten => 600,2,Echo ; Do the echo test
> exten => 600,3,Playback(demo-echodone) ; Let them know it's over
> exten => 600,4,Goto(s,6) ; Start over
>
> ;
> ; Give voicemail at extension 8500
> ;
> exten => 8500,1,VoicemailMain
> exten => 8500,2,Goto(s,6)
> ;
> ; Here's what a phone entry would look like (IXJ for example) ; ;exten =>
> 1265,1,Dial(Phone/phone0,15) ;exten => 1265,2,Goto(s,5)
>
> ;[mainmenu]
> ; Example "main menu" context with submenu ; ;exten => s,1,Answer
> ;exten => s,2,Background(thanks) ; "Thanks for calling
press
> 1 for sales, 2 for support, ..."
> ;exten => 1,1,Goto(submenu,s,1)
> ;exten => 2,1,Hangup
> ;include => default
> ;
> ;[submenu]
> ;exten => s,1,Ringing ; Make them
> comfortable with 2 seconds of ringback
> ;exten => s,2,Wait,2
> ;exten => s,3,Background(submenuopts) ; "Thanks for calling the sales
> department. Press 1 for steve, 2 for..."
> ;exten => 1,1,Goto(default,steve,1)
> ;exten => 2,1,Goto(default,mark,2)
>
> [default]
> ;
> ; By default we include the demo. In a production system, you ; probably
> don't want to have the demo there.
> ;
> include => demo
>
>
> ; Real extensions would go here. Generally you want real extensions to be
4
> or 5 ; digits long (although there is no such requirement) and start with
a
> single ; digit that is fairly large (like 6 or 7) so that you have plenty
of
> room to ; overlap extensions and menu options without conflict. You can
> alias them with ; names, too and use global variables
>
>
> exten => 6275,1,Macro(stdexten,6275,${MARK}) ; assuming
> ${MARK} is something like Zap/2
> exten => mark,1,Goto(6275|1) ;
> alias mark to 6275
> exten => 6236,1,Macro(stdexten,6236,${WIL}) ; Ditto
for
> wil
> exten => wil,1,Goto(6236|1)
>
> ;
> ; Some other handy things are an extension for checking voicemail via ;
> voicemailmain ; ;exten => 8500,1,VoicemailMain ;exten => 8500,2,Hangup ; ;
> Or a conference room (you'll need to edit meetme.conf to enable this room)
;
> ;exten => 8600,1,Meetme,1234 ; ; Or playing an announcement to the called
> party, as soon it answers ; ;exten =
> 8700,1,Dial(${MARK},30,A(/path/to/my/announcemsg))
> ;
> ; For more information on applications, just type "show applications" at
> your ; friendly Asterisk CLI prompt.
> ;
> ; 'show application <command>' will show details of how you ; use that
> particular application in this file, the dial plan.
> ;
> [from-sip]
> exten => 1001,1,Dial(SIP/1001)
> exten => 1001,2,Wait(1)
> exten => 1001,3,Answer
> exten => 1001,4,Hangup
> include => demo
> include => local
> ;exten => _9X,1,Dial,Zap/1/${EXTEN:1}
> ;exten => _9X,2,Goto(102)
> ;exten => _9X,102,Congestion
> ;exten => _9X,103,Hangup
>
>
>
> ZAPTEL.CONF
> loadzone = us
> #default = us
>
> fxsks=1
>
> Please, notice that "default=us" is commented since when I run ztcfg -vvv
it
> gave me the following error:
> [EMAIL PROTECTED]:/etc# ztcfg -vvvv
> Notice: Configuration file is /etc/zaptel.conf line 2: Unknown keyword
> 'default'
>
> 1 error(s) detected
>
> I commented the line 2 and run ztcfg again and it worked without errors.
> May it has no relationship with the error describe above.
>
>
> Thanks.
> Jaime
>
>
> Jaime Blanco
> President
> Ximark Technologies, Inc.
> Solutions for Keeping your Business Up
> Phone: +507 271 5951 (Panama)
> +1 928 752 1325 (USA)
> Cell: +507 676 0623
> Corporate email: <mailto:[EMAIL PROTECTED]> [EMAIL PROTECTED]
> Personal email: <mailto:[EMAIL PROTECTED]> [EMAIL PROTECTED]
> MSN ID: <mailto:[EMAIL PROTECTED]>
> [EMAIL PROTECTED]
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
