Hello,
Actualy I have got a PBX conected to a BRI port on a Cisco Router witch route the calls. The router is using h323 with the other end.
How could I replace the actual PBX and pass all the calls to the router, as now works.
I tryed connecting an asterisk CAPI port against the same BRI Cisco port, but I can not make any calls, I get the following error from asterisk.
Connected to Asterisk 1.0.3 currently running on Asterisk-OKM (pid = 991)
Verbosity is atleast 3
-- Remote UNIX connection
-- Executing ChanIsAvail("SIP/112-8c2e", "CAPI/916741111&CAPI/916741111&CAPI/914850127&CAPI/914850127") in new stack
-- data = "">
-- capi request omsn = 916741111
== found capi with omsn = 916741111
-- Executing SetVar("SIP/112-8c2e", "CANAL=916741111") in new stack
-- Executing Dial("SIP/112-8c2e", "CAPI/916741111:263|70|Tt") in new stack
-- data = "">
-- capi request omsn = 916741111
== found capi with omsn = 916741111
== CAPI Call CAPI[contr2/916741111]/59 -- Called 916741111:263
-- CONNECT_CONF ID=001 #0x0026 LEN=0014
Controller/PLCI/NCCI = 0x102
Info = 0x0
== received CONNECT_CONF PLCI = 0x102 INFO = 0
-- DISCONNECT_IND ID=001 #0x001b LEN=0014
Controller/PLCI/NCCI = 0x102
Reason = 0x3301
== DISCONNECT_IND PLCI=0x102 REASON=0x3301
== No one is available to answer at this time
Any help will be welcomed.
Thanks.
Ismael.
_______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
