----- Original Message ----- From: "Scott Wolfe" <[EMAIL PROTECTED]>
To: "Asterisk Users Mailing List - Non-Commercial Discussion" <asterisk-users@lists.digium.com>
Sent: Sunday, April 24, 2005 11:09 AM
Subject: Re: [Asterisk-Users] TE11OP -> Mitel 200Sx??
Thanks Henry, -Scott
----- Original Message ----- From: "Henry Devito" <[EMAIL PROTECTED]>
To: "Asterisk Users Mailing List - Non-Commercial Discussion" <asterisk-users@lists.digium.com>
Sent: Saturday, April 23, 2005 11:05 PM
Subject: Re: [Asterisk-Users] TE11OP -> Mitel 200Sx??
I am trying to locate the manual for that level software. If it's not here at home it is at my office and I will look everything up in the morning.
----- Original Message ----- From: "Scott Wolfe" <[EMAIL PROTECTED]>
To: "Asterisk Users Mailing List - Non-Commercial Discussion" <asterisk-users@lists.digium.com>; <[EMAIL PROTECTED]>
Sent: Saturday, April 23, 2005 9:00 PM
Subject: Re: [Asterisk-Users] TE11OP -> Mitel 200Sx??
The Switch is since 1995 and I get a SX-200 Digital G1005 ENH 672P / F25.0 09-FEB1994 when I look up the software on the switch board so if I am reading what your telling me then I have to do D4/AMI. So does my zaptel look correct? Maybe my cableing is off.
Thanks,
-Scott
----- Original Message ----- From: "Henry Devito" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>; "Asterisk Users Mailing List - Non-Commercial Discussion" <asterisk-users@lists.digium.com>
Sent: Friday, April 22, 2005 8:34 PM
Subject: Re: [Asterisk-Users] TE11OP -> Mitel 200Sx??
Of course there are exceptions to the rules. I see now on a couple software releases where they do allow PRI with D4/AMI and PRI with esf/b8zs. It's been a year or so since I messed with trunking on a 200, I've mostly been installing and maintaining the SX2000's and 3300's.
Henry
----- Original Message ----- From: "Dennis Walker" <[EMAIL PROTECTED]>
To: "'Asterisk Users Mailing List - Non-Commercial Discussion'" <asterisk-users@lists.digium.com>
Sent: Friday, April 22, 2005 9:13 PM
Subject: RE: [Asterisk-Users] TE11OP -> Mitel 200Sx??
I have done the same thing with an sx200 and a pri circuit
My sx200 can only do ami d4 and e&m channels
Here's parts of my config that takes the pri and converts it to e&m with
ANI & DNIS
zaptel.conf
# t1 connected to the PRI circuit span=1,1,0,exf,b8zs
# t1 connected to SX200
# the t1 card on my sx200 did d4 ami and I supplied ANI and DNIS through
the dial plan
span=2,0,0,d4,ami
bchan=1-23 dchan=24 e&m=25-47 --------------------------------------------- zapata.conf
[channels]
echocancel=yes echocancelwhenbridged=yes echotraining=no rxgain=0.0 txgain=0.0 useincomingcalleridonzaptransfer=yes restrictcid=no context=default usecallingpres=yes usercallerid=yes hidecallerid=no callerid="Company Name"<8005551212> signalling=pri_cpe switchtype=dms100 group=1 channel => 1-23
group=2 signalling=em_w emdigitwait=500 channel => 24-47
# I needed the emdigitwait=500 to wait long enough for the SX200 to dial
out it's digits
-------------------------------------------------- extensions.conf
# our PRI circiut gave us the last 4 digits of the dialed number and this
is how I passed
# *ANI*DNIS* to the SX200 for it to decode
# the first group were individual numbers that mapped to faxes and modems
exten => 1234,1,Dial(Zap/g2/*${CALLERIDNUM}*${EXTEN}*,,r) exten => 5555,1,Dial(Zap/g2/*${CALLERIDNUM}*${EXTEN}*,,r) exten => 3333,1,Dial(Zap/g2/*${CALLERIDNUM}*${EXTEN}*,,r)
# this set mapped our did 5000 - 5199 to the SX200
exten => _5[0-1]XX,1,Dial(Zap/g2/*${CALLERIDNUM}*${EXTEN}*,,r)
The reset of the dial plan took what ever I set up in the sx200 ARS to dial
out and
sent out put Zap/G1
Hope this helps
----------
From: Henry Devito[SMTP:[EMAIL PROTECTED]
Reply To: Asterisk Users Mailing List - Non-Commercial Discussion
Sent: Friday, April 22, 2005 8:56 PM
To: Scott Wolfe; Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] TE11OP -> Mitel 200Sx??
<<File: ATT00262.html>><<File: ATT00263.txt>>
I was wrong. I just looked in my Mitel I&M's. What level software are you
on in the SX200? Up until a certain level 200's could only do D4/AMI T1's,
they could not do PRI's. If it is a newer switch within the past 3 years
or an older switch with later software than you can do PRI, but the
signaling and framing must be ESF/B8ZS.
Henry ----- Original Message ----- From: Scott Wolfe To: [EMAIL PROTECTED] ; Asterisk Users Mailing List - Non-Commercial Discussion Sent: Friday, April 22, 2005 7:04 PM Subject: Re: [Asterisk-Users] TE11OP -> Mitel 200Sx??
Thanks,
This is what I have now, but my Mitel PBX and Asterisk Box are unable
to communicate via the T1 connection. Asterisk loads ok but I get error
lights (blinking orange) on my TE110P and on my Mitel T1 card. Hummmm
-Scott
/etc/zaptel.conf loadzone = us defaultzone=us span=1,0,0,d4,ami bchan=1-23 dchan=24
/etc/asterisk/zapata.conf [trunkgroups]
[channels] context=default switchtype=dms100 rxwink=300 usecallerid=no hidecallerid=no callwaiting=no usecallingpres=yes callwaitingcallerid=no threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes rxgain=0.0 ;into the pstn twords the telco txgain=0.0 callgroup=1 pickupgroup=1 immediate=yes
signalling=pri_cpe group=1 context=default emdigitwait=500 channel => 1-23 ; Set this to 1-15,17-31 for E1
----- Original Message ----- From: Michael D Schelin To: Asterisk Users Mailing List - Non-Commercial Discussion Sent: Friday, April 22, 2005 4:48 PM Subject: Re: [Asterisk-Users] TE11OP -> Mitel 200Sx??
Hello Henry e&m=1-23 should be bchan=1-23 you have it set for analog also signaling=pri_cpe
Henry Devito wrote:
Don't you need one of these directives so the PRI knows which is master and which is slave?
a.. pri_cpe: PRI signaling, CPE side a.. pri_net: PRI signaling, Network side
Henry ----- Original Message ----- From: Scott Wolfe To: Asterisk-Users@lists.digium.com Sent: Friday, April 22, 2005 11:01 AM Subject: [Asterisk-Users] TE11OP -> Mitel 200Sx??
Hello all. I just received a TE110P and am trying to hook it to my
Mitel 200SX has anyone successfully done this? My configuration is as
follows.
Asterisk -> TE110P ->Kentrox (csu/dsu) -> Mitel T1 Card.
All I get is a blinking yellow on my TE110P card and an alarm on my
Mitel. T1 card.
Any advice would be great.
Zaptel.conf
span=1,0,1,d4,ami
e&m=1-23
dchan=24
Zapata.conf
signalling=em_w
switchtype=dms100
echocancel=yes
echocancelwhenbridged=yes
echotraining=400
callerid=asreceived
group=1
context=default
channel => 1-23
------------------------------------------------------------------------ _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -------------------------------------------------------------------------- _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
------------------------------------------------------------------------ ----
_______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
------------------------------------------------------------------------ ------
_______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
