I upgraded my FC3 to kernel 2.6.11. I installed bristuff 0.2.0-RC8 and I cannot call out using zaphfc. I can receive calls, but can't get out. Here is what I got:
-- Starting simple switch on 'Zap/4-1' -- Executing Dial("Zap/4-1", "Zap/1/******348|60|rTt") in new stack > [ 00 e7 0e 12 08 01 04 05 04 03 80 90 a3 18 01 81 6c 05 41 80 31 30 31 70 0b c1 30 35 30 31 33 35 39 33 34 38 a1 ] > Informational frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 115 EA: 1 > N(S): 007 0: 0 > N(R): 009 P: 0 > 33 bytes of data -- Restarting T203 counter Stopping T_203 timer Starting T_200 timer > Protocol Discriminator: Q.931 (8) len=33 > Call Ref: len= 1 (reference 4/0x4) (Originator) > Message type: SETUP (5) > [04 03 80 90 a3] > Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer capability: Speech (0) > Ext: 1 Trans mode/rate: 64kbps, circuit-mode (16) > Ext: 1 User information layer 1: A-Law (35) > [18 01 81] > Channel ID (len= 3) [ Ext: 1 IntID: Implicit, Other Spare: 0, Preferred Dchan: 0 > ChanSel: B1 channel ] > [6c 05 41 80 31 30 31] > Calling Number (len= 7) [ Ext: 0 TON: Subscriber Number (4) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1) > Presentation: Presentation permitted, user number not screened (0) '101' ] > [70 0b c1 *********** 33 34 38] > Called Number (len=13) [ Ext: 1 TON: Subscriber Number (4) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1) '******348' ] > [a1] > Sending Complete (len= 1) -- Called 1/******348 < [ 00 e7 01 10 ] < Supervisory frame: < SAPI: 00 C/R: 0 EA: 0 < TEI: 115 EA: 1 < Zero: 0 S: 0 01: 1 [ RR (receive ready) ] < N(R): 008 P/F: 0 < 0 bytes of data -- ACKing all packets from 6 to (but not including) 8 -- ACKing packet 7, new txqueue is -1 (-1 means empty) -- Since there was nothing left, stopping T200 counter -- Nothing left, starting T203 counter -- Restarting T203 counter < [ 02 e7 12 10 08 01 84 02 18 01 89 ] < Informational frame: < SAPI: 00 C/R: 1 EA: 0 < TEI: 115 EA: 1 < N(S): 009 0: 0 < N(R): 008 P: 0 < 7 bytes of data -- ACKing all packets from 7 to (but not including) 8 -- Since there was nothing left, stopping T200 counter -- Stopping T203 counter since we got an ACK -- Nothing left, starting T203 counter < Protocol Discriminator: Q.931 (8) len=7 < Call Ref: len= 1 (reference 132/0x84) (Terminator) < Message type: CALL PROCEEDING (2) < [18 01 89] < Channel ID (len= 3) [ Ext: 1 IntID: Implicit, Other Spare: 0, Exclusive Dchan: 0 < ChanSel: B1 channel ] Sending Receiver Ready (10) > [ 02 e7 01 14 ] > Supervisory frame: > SAPI: 00 C/R: 1 EA: 0 > TEI: 115 EA: 1 > Zero: 0 S: 0 01: 1 [ RR (receive ready) ] > N(R): 010 P/F: 0 > 0 bytes of data -- Restarting T203 counter -- Restarting T203 counter < [ 02 e7 14 10 08 01 84 45 08 02 82 95 1c 0f 91 a1 0c 02 02 16 c8 06 06 04 00 87 69 01 07 1e 02 82 88 ] < Informational frame: < SAPI: 00 C/R: 1 EA: 0 < TEI: 115 EA: 1 < N(S): 010 0: 0 < N(R): 008 P: 0 < 29 bytes of data -- ACKing all packets from 7 to (but not including) 8 -- Since there was nothing left, stopping T200 counter -- Stopping T203 counter since we got an ACK -- Nothing left, starting T203 counter < Protocol Discriminator: Q.931 (8) len=29 < Call Ref: len= 1 (reference 132/0x84) (Terminator) < Message type: DISCONNECT (69) < [08 02 82 95] < Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location: Public network serving the local user (2) < Ext: 1 Cause: Call Rejected (21), class = Normal Event (1) ] < [1c 0f 91 a1 0c 02 02 16 c8 06 06 04 00 87 69 01 07] < Facility (len=17, codeset=0) [ 0x91, 0xa1, 0x0c, 0x02, 0x02, 0x16, 0xc8, 0x06, 0x06, 0x04, 0x00, 0x87, 'i', 0x01, 0x07 ] < [1e 02 82 88] < Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location: Public network serving the local user (2) < Ext: 1 Progress Description: Inband information or appropriate pattern now available. (8) ] Sending Receiver Ready (11) > [ 02 e7 01 16 ] > Supervisory frame: > SAPI: 00 C/R: 1 EA: 0 > TEI: 115 EA: 1 > Zero: 0 S: 0 01: 1 [ RR (receive ready) ] > N(R): 011 P/F: 0 > 0 bytes of data -- Restarting T203 counter -- Restarting T203 counter -- Channel 0/1, span 1 got hangup -- Zap/1-1 is circuit-busy > [ 00 e7 10 16 08 01 04 4d 08 02 81 95 ] > Informational frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 115 EA: 1 > N(S): 008 0: 0 > N(R): 011 P: 0 > 8 bytes of data -- Restarting T203 counter Stopping T_203 timer Starting T_200 timer > Protocol Discriminator: Q.931 (8) len=8 > Call Ref: len= 1 (reference 4/0x4) (Originator) > Message type: RELEASE (77) > [08 02 81 95] > Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location: Private network serving the local user (1) > Ext: 1 Cause: Call Rejected (21), class = Normal Event (1) ] -- Hungup 'Zap/1-1' == Everyone is busy/congested at this time < [ 00 e7 01 12 ] < Supervisory frame: < SAPI: 00 C/R: 0 EA: 0 < TEI: 115 EA: 1 < Zero: 0 S: 0 01: 1 [ RR (receive ready) ] < N(R): 009 P/F: 0 < 0 bytes of data -- ACKing all packets from 7 to (but not including) 9 -- ACKing packet 8, new txqueue is -1 (-1 means empty) -- Since there was nothing left, stopping T200 counter -- Nothing left, starting T203 counter -- Restarting T203 counter < [ 02 e7 16 12 08 01 84 5a ] < Informational frame: < SAPI: 00 C/R: 1 EA: 0 < TEI: 115 EA: 1 < N(S): 011 0: 0 < N(R): 009 P: 0 < 4 bytes of data -- ACKing all packets from 8 to (but not including) 9 -- Since there was nothing left, stopping T200 counter -- Stopping T203 counter since we got an ACK -- Nothing left, starting T203 counter < Protocol Discriminator: Q.931 (8) len=4 < Call Ref: len= 1 (reference 132/0x84) (Terminator) < Message type: RELEASE COMPLETE (90) Sending Receiver Ready (12) > [ 02 e7 01 18 ] > Supervisory frame: > SAPI: 00 C/R: 1 EA: 0 > TEI: 115 EA: 1 > Zero: 0 S: 0 01: 1 [ RR (receive ready) ] > N(R): 012 P/F: 0 > 0 bytes of data -- Restarting T203 counter -- Restarting T203 counter Then it says that Zap/1 is circuit-blocked. Where should I look for solution? -- Mike _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users