Michael Welter wrote:
I finally got to test... Removing the tdm module makes no difference in the static. I still hear it for any incoming sound. Removing it does, however clean up the CPU usage but quite a bit. One odd thing was with the tdm module removed, it seemed to introduce a little delay in the conversation.Mark Johnson wrote:
I tested and I do in fact get from 40-50% system util every 5 seconds or so. After removing the wctdm module, the system util drops to 0 and stays there. I have not loaded the wcfxs and wcfxo modules because I could never get them to work right. I instead load the wctdm and it has seemed to work fine. I only need to make the fx port to the paging system work and the others can stay idle. What modules and order so you suggest. Here is what I load in this order:
wct4xxp wctdm
Do you still have the static on the PRI without the TDM modules?
I also tried to recompile the zaptel drivers with the aggresive cancellation. This seems to made a HUGE improvement to my echo problem.
Any ideas?
Mark _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
