Did you put your card in TE mode ? To it seems you have configured your card to act like a NT but if you are connected to bri telco lines, it should be in TE mode
check in your zaptel.conf : bri te signalling regards David -----Message d'origine----- De : Altus Snyman [mailto:[EMAIL PROTECTED] Envoy� : vendredi 29 avril 2005 12:08 � : Asterisk Users Mailing List - Non-Commercial Discussion Objet : [Asterisk-Users] bri error Good day all This is a error that keeps on popping up in my /var/log/messages when I get incoming or outgoing calls on my bri card connected to 4 telco isdn units?It is a junghanns 4 port card with the latest version of the drivers and latest asterisk Apr 29 11:37:39 ccv kernel: qozap: BAD CRC for hdlc frame on card 1 (cardID 0) S/T port 1 Apr 29 11:37:39 ccv kernel: qozap: check the 100 Ohm termination for this span! Apr 29 11:45:25 ccv kernel: zaptel Disabled echo canceller because of tone (rx) on channel 1 Please help and advice? _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
