Are you sure it's registering? ----- Dan Levine CYTEXONE | Your Technology Specialists t: 877.CYTEXONE x 810 l: 212.477.0990 x 810 e: [EMAIL PROTECTED] http://www.cytexone.com
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Patrick Gray, Jr. Sent: Saturday, April 30, 2005 12:04 AM To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] Can't get incoming calls with IAX trunks (FWD &Teliax) I have [EMAIL PROTECTED] 0.9 running, and everything seems to work well EXCEPT incoming calls. I have an FWD and Teliax trunk (both using IAX), and a Cisco 7960 SIP phone connected to Asterisk. Everything tests fine: - Can call from softphone to Cisco and vice versa - Asterisk inbound simulation works like a champ - Voicemail works fine - Outbound calls to both trunks works fine However, when I call into my system on the FWD or Teliax trunks, nothing happens. Nothing appears on the asterisk console so I'm not even sure where to start. I'm suspecting network problems, but don't know what to look for. My asterisk box sits on my LAN, behind an IPCop-based NAT router. I've forwarded port 4569 UDP and TCP to the asterisk box, but still no joy. I've googled and checked voip-info, but everything that mentions NAT as a potential problem points to IAX as the solution. Trunk-wise, I'm pure IAX (only SIP is the 7960, and it's on the same network as the asterisk box). I'm pretty new to asterisk, so if you can dumb down any debugging advice I'd appreciate it. Thanks a ton! Pat _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users