This question will be better addressed on the aah forums. I would suggest: 1) have you setup a DID? 2) take a look in the log file tail -f /var/log/asterisk/full 3) see the numerous threads on the aah forums about how to configure FWD and Teliax (and other providers)
I personally have both FWD and Teliax working perfectly fine with aah. Here are the relevant parts of my iax_additional.conf. Of course you should replace USERID, FWDNUMBER and PASSWORD with yours. Of course you should not change iax_additional.conf directly, but paste the different parts in AMP -------------- excerpt from iax_additional.conf -------------- register=USERID:[EMAIL PROTECTED] register=FWDNUMBER:[EMAIL PROTECTED] [fwd] username=FWDNUMBER type=peer secret=PASSWORD qualify=yes host=iax2.fwdnet.net disallow=all context=from-pstn auth=md5 allow=ulaw [fwd-in] type=user inkeys=freeworlddialup disallow=all context=from-pstn auth=rsa allow=ulaw [teliax] username=USERID type=friend ; one should think it has to be peer, but that does not work secret=PASSWORD host=voip.teliax.com context=from-pstn auth=md5 [teliax-in] username=USERID type=user secret=PASSWORD host=voip.teliax.com context=from-pstn auth=md5 -------------- end excerpt from iax_additional.conf -------------- > > Message: 28 > Date: Fri, 29 Apr 2005 21:03:39 -0700 (PDT) > From: "Patrick Gray, Jr." <[EMAIL PROTECTED]> > Subject: [Asterisk-Users] Can't get incoming calls with IAX trunks > (FWD & Teliax) > To: asterisk-users@lists.digium.com > Message-ID: <[EMAIL PROTECTED]> > Content-Type: text/plain; charset=us-ascii > > I have [EMAIL PROTECTED] 0.9 running, and everything seems > to work well EXCEPT incoming calls. > > I have an FWD and Teliax trunk (both using IAX), and a > Cisco 7960 SIP phone connected to Asterisk. > Everything tests fine: > > - Can call from softphone to Cisco and vice versa > - Asterisk inbound simulation works like a champ > - Voicemail works fine > - Outbound calls to both trunks works fine > > However, when I call into my system on the FWD or > Teliax trunks, nothing happens. Nothing appears on > the asterisk console so I’m not even sure where to > start. I’m suspecting network problems, but don’t > know what to look for. My asterisk box sits on my > LAN, behind an IPCop-based NAT router. I’ve forwarded > port 4569 UDP and TCP to the asterisk box, but still > no joy. I’ve googled and checked voip-info, but > everything that mentions NAT as a potential problem > points to IAX as the solution. Trunk-wise, I’m pure > IAX (only SIP is the 7960, and it’s on the same > network as the asterisk box). > > I’m pretty new to asterisk, so if you can dumb down > any debugging advice I’d appreciate it. > > Thanks a ton! > > Pat > _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
