I have installed Asterisk on a CentOS4 box and then installed Asterisk from CVS. I installed a Sangoma A101 and connected it to a Adtran 600 using a T1 Crossover cable. The 600 has 12 x FXS, 12 x FXO interfaces.
I ran through the wanpipe install instructions and configured it, now I can run [EMAIL PROTECTED] asterisk]# wanrouter hwprobe ------------------------------- | Wanpipe Hardware Probe Info | ------------------------------- 1 . AFT-A101u : SLOT=1 : BUS=1 : IRQ=209 : CPU=A : PORT=PRI Card Cnt: S508=0 S514X=0 S518=0 A101-2=1 A104=0 A300=0 So I know the card is there OK. My /etc/zaptel.conf looks like: span=1,1,0,esf,b8zs loadzone = us defaultzone=us fxsls=1-12 I am only trying to get half to load for now to make it simple. [EMAIL PROTECTED] asterisk]# ztcfg Notice: Configuration file is /etc/zaptel.conf line 0: Unable to open master device '/dev/zap/ctl' 1 error(s) detected When I run "service zaptel restart" I get: Waiting for zap to come online...Error: missing /dev/zap! Wha am I doing wrong? Chris Mason NetConcepts (264) 497-5670 Fax: (264) 497-8463 Int: (646)722-0001 Fax: (815)301-9759 (305) 704-7249 Yahoo IM: [EMAIL PROTECTED] Skype ID: netconcepts _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
