Here is the situation. I've got * installed. I have Grandstream BT-100 with latest beta firmware installed and Cisco 7960G.
[3710] ; -----------------> Grandstream context=default type=friend username=3710 user=phone host=dynamic dtmfmode=rfc2833 [EMAIL PROTECTED] qualify=2000 disallow=all allow=g729 allow=ulaw [1707] ;---------> Cisco 7960 context=default type= friend username=1707 host = dynamic mailbox = [EMAIL PROTECTED] dtmfmode=rfc2833 qualify=2000 disallow=all allow=g729 allow=ulaw On Cisco 7960 preferred codec is G711. Here is a fragment from sipdefault.cnf --------------------------------- # Codec for media stream (g711ulaw (default), g711alaw, g729) preferred_codec: g711ulaw --------------------------------- On BT-100 in codec list #1 and #2 are G729 and then G711, G723.1 and so on. When 7960 calls BT-100 then G711 codec is used. But when BT-100 calls 7960 always G711 is used. My question is - there any way to force using G729 codec when BT-100 calls 7960 with following conditions: 1. without setting G729 as a preferred codec for 7960 2. without setting all codecs in BT-100 to G729? So, is there a way for a outgoing call from BT-100 to use local end's preference of codecs, instead of remote end? I.N. _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
