all working thanks!
On Thu, 2005-05-05 at 12:39 +0200, Peter Svensson wrote: > On Thu, 5 May 2005, Dan Goscomb wrote: > > > it seems that when i dial the number without the leading 0 it works... > > > > with the leading 0 it does not > > > > any ideas? > > You need "pridialplan=unknown" in your config file. The "unknown" TON/NPI > means that the PSTN should interpret the called party number as if it was > dialed on a normal phone, prefix zeroes and all. > > The default for Asterisk unfortunatly is "national" TON which is almost > never correct. That TON implies that the number is a fully formed national > number without prefixes. I.e. including an area code but no leading zero. > It is impossible to dial an international number with that TON. > "international" would be another possible choise. > > Using the "nationalprefix", "internationalprefix" etc settings Asterisk > can be made to change the outgoing TON depending on the number dialed. > > For most pstn connections using the "unknown" TON is advisable. > > Peter > > > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > -- Dan Goscomb <[EMAIL PROTECTED]> _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users