Sometimes this all sounds so complicated....but it needn't be. I
suppose it can vary with the size of your installation.

I use a m0n0wall router on a Covad DSL line. Using m0n0's traffic
shaping feature I establish inbound and outbound pipes which are
bandwidth restricted to just less than my mesured average DSL rate.  I
then break my traffic into three priority ques in each direction;
highest priority, medium priority, low priority.

I assign all IAX traffic in/out to the highest priority que, and map
all IAX ports to the * server inside the LAN.

In fact, I just used the Magic Shaper Wizard in m0n0, then added IAX
specific entries to give it highest priority. The whole process took
about a half hour. Just as easy as the Linksys BEFSR-81 that I had
before, but more reliable and more controllable.

Now to be fair, I only have about 6 phones. I use IAX2 to all my ITSPs
and SIP in-house only. My DSL is 3M down / 768k up.

Michael

On Fri, 06 May 2005 08:37:20 +0200, Jean-Christophe Heger wrote:

>I've spent may hours to play with HTB QoS settings on the firewall, but with 
>absolutely no effect. In fact, this is normal, because the time required to 
>let a data packet going through the ADSL line will break the voice jitter. The 
>only right way to handle this issue is to modify the MTU on the router.
>
>Without setting a TOS for voip, data where going through and voice was 
>unusable.
>With a lowdelay (0x10) TOS set for voip, voice was going through, but data was 
>blocked.
>With a lowdelay TOS and an HTB QoS on the router, data where going through 
>slowly and voice was scambled.
>
>After many tests, an MTU of 700 did work quite well. I did loose 15% of 
>bandwidth for data (twice more overheads), but data and voice may be used 
>together.
>
>Those tests have been done on a 256 kbps up stream.
>
>There is a quite good explenation about this issue on Cisco's web
>site, and about they're LFI technology (link fragmentation and interleaving):
>http://www.cisco.com/warp/public/788/voice-qos/voip-mlppp.html#link_frag
>
>Jean-Chrsitophe
>
>
>
>
>Kumara Jayaweera a écrit :
>
>>Hello! Everybody!!,
>>I want to run VoIP in the same LAN (15 windows clients) which we use for
>>surfing the Internet. 6-7 softphones in the same client's machines is 'the
>>target'. My DSL is 128kbps, (I can go to 256kbps if required). So, I am told
>>to install some QoS's in the LAN to improve the voice quality. Frankly, I
>>don't know what it (QoS= Quality of Service) is. I hope you may help me
>>giving "Links" to read and briefing me your ideas.
>>Thanks to everybody in the list.
>>So far my success and progress are your help.
>>Thanks again
>>Kumara
>>
>>_______________________________________________
>>Asterisk-Users mailing list
>>Asterisk-Users@lists.digium.com
>>http://lists.digium.com/mailman/listinfo/asterisk-users
>>To UNSUBSCRIBE or update options visit:
>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>>  
>>
>
>_______________________________________________
>Asterisk-Users mailing list
>Asterisk-Users@lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-users
>To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>

--
Michael Graves                           [EMAIL PROTECTED]
Sr. Product Specialist                          www.pixelpower.com
Pixel Power Inc.                                 [EMAIL PROTECTED]

o713-861-4005
o800-905-6412
c713-201-1262



_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

Reply via email to