I've had similar issues with TDM400P FXS ports and it turned out to be a voltage issue. According to spec a North American FXS port (whether from your ATA or your telco should generate a 89V, 20Hz AC signal for ringing. Some systems try to use a low voltage ring (usually about 45V) which won't trigger some phones.
Incidentally I have a SPA-1001 and it's giving me no problems. Ian >>> [EMAIL PROTECTED] 10/05/2005 17:52 >>> I hooked up a SPA-1001 with asterisk yesterday and all works well except the phone doesn't ring. The phone I'm using has a LCD display so I can see the call come in. (with caller id info) I can answer and complete the call but it's just not ringing. The phone rings if pluged into a POTS line so it's not the phone that's the problem. I've used the SPA-1001's web interface and the ringer seems to be enabled. Is there some setting I'm missing? Or is there something special I have to set up in asterisk? Malcolm Bader _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users