Sangoma is great prompt response to the problem, its fixed now Use the latest stable latest stable 2.3.2-3
+++ Vikram Rangnekar [05/05/05 08:58 +0200]: > > have an asterisk box (P4, 1GB RAM, etc ) with a sangoma two E1 port card in > it. I have used a E1 cross cable to connect the two E1 ports together and > pass calls through them for testing purposes allo works fine. also have > multiple voip phones connected to this setup, > > what i noticed is that when i pull any one end of the E1 (breaking the E1 > connection) I get multiple RED ALARMS on the zap channels I understand this > is ok and should happen if the E1 link breaks but my problem is that asterisk > stops doing a lot of other things too like i have extensions configured to > meetme, voicemail and other aplications they all stop working i get no > sound but when i call one hardphone to another it works i guess thats cause > the rtp streams go from phone to phone directly. but why does asterisk stop > passing anything through itself. Also if anyone else has experience this is > this only with sangoma or does it happen with asterisk too. I have a digium > card but its a single port and i dont have a real E1 link to test with. ) > > Few lines from the dump i get on the asterisk cli. the first few lines are > the red alarm and the rest of me trying to call up an extension > -- regards Vikram (http://www.vicramresearch.com) _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
