On May 15, 2005, at 00:55, Jean-Yves Avenard wrote:
Hi
On 15/05/2005, at 5:51 PM, Bryce Chidester wrote:
I have the same trouble with wct1xxp. I'd just chalked it up to a PCI bug or other low-level hardware problem with the Digium card. I've simply learned not to, though it would be nice to not have to learn work-arounds.
This only happen if I have something like: span=1,1,0,ccs,hdb3,crc4
If I have: span=1,1,0,ccs,hdb3,crc4
I'm actually using a T1 to a ChannelBank so my span line looks like: span=1,0,0,esf,b8zs
then it doesn't hang... Doubt it's a PCI bug ....
Seems rather fishy that no matter medium or timing source, rmmod'ing the module could hang the machine. Maybe I'll look into this more when I get the logic analyzer hooked up.
Luckily I have an electronic switch I can control remotely to turn the machine off/on !
Mine's in the closet at the end of the office... so far to walk, 30ft/ 10m :-P. Well, that and fortunately I don't find myself doing it often - once a month average so far.
Regards,
Bryce Chidester
Rhino Equipment Corp.
[EMAIL PROTECTED] SIP: [EMAIL PROTECTED]
+1 (480) 940-1826 x305 IAX: [EMAIL PROTECTED]/305
_______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users