There was an issue raised about a month or so ago due to one of the itsp's (using iax) that involved dtmf not working "after" an iax call is considered "answered". Might that be a possibility?
I opened a bug report on it, but it was immediately closed with a comment "that's the way * operates" and "its an itsp problem". So nothing was ever done about it. ------------------------ > Hello, Steve and thank you for replying. > > Yes, I know the DISA is going to the correct context because when a user > direct-dials into the box (not coming in via FWD) everything works fine > -- the tones are understood and acted upon. This only happens when > calls are originating from a FWD connection. I'm pretty stumped on this > one. > > Steve Maroney wrote: > > >What about your dialplan ? Make sure the DISA app is going to correct > >context that contains the extensions that you want to dial. > > > > > >Thank you, > >Steve Maroney > > > >On Sun, 15 May 2005, Jeffrey Starin wrote: > > > > > > > >>Tnanks for the reply. > >> > >>Well, I am only using SIP, I do not have any digium cards or IAX > >>protocols. The Asterisk box only understand the initial dtmf tones if > >>FWD is set to inband, anything else the caller cannot even transfer to > >>the extension that provides DISA. Here is some other information that > >>may help a guru troubleshoot the problem: > >> > >>using Asterisk CVS-HEAD-5/15/05 on a Centos Operating system kernel > >>2.4.21-27.0.4.EL > >> > >>Here are the pertinent entries from the SIP: > >>[general] > >>bindaddr=0.0.0.0 > >>port=5060 > >>externip=x.x.x.x > >>localnet=192.168.1.0/255.255.255.0 > >>disallow=all > >>allow=ulaw > >>canreinvite=no > >>defaultexpirey=160 > >>maxexpiry=180 > >>context=nothing > >>tos=reliability > >>register=bla.bla.bla > >> > >> > >>[fwd] > >>type=friend > >>host=fwd.pulver.com > >>username=blablabla > >>secret=secretblablabla > >>fromdomain=fwd.pulver.com > >>context=from-fwd > >>insecure=very > >>dtmfmode=inband ;the documenation on wiki says use RFC2833, but in > >>either case when I toggle this value same results...DISA does not accept > >>tones > >>canreinvite=no > >>disallow=all > >>allow=ulaw > >> > >> > >>Also, another pretty obvious question: I understand that for examle in > >>the [fwd] entries above those are ths settings that take effect in any > >>communication woth FWD. However, I'm confused as to the purpose of the > >>"general" settings -- to what or which connection do they apply? Since > >>the context suggested for the general settings is something like > >>"nothing" to avoid unwanted sip calls, I'm confused as to the purposse > >>of those entries. Can someone shed some light on that for me? > >> > >>Thanks, > >> > >>J > >> > >> > >>Vaniah Voip wrote: > >> > >> > >> > >>>Wilson Pickett wrote: > >>> > >>> > >>> > >>>>>Any other suggestions? > >>>>> > >>>>> > >>>>> > >>>>> > >>>>Have you tried limiting it to ulaw for a test? FWD does ulaw ONLY anyway. > >>>>_______________________________________________ > >>>> > >>>> > >>>> > >>>> > >>>A good question would be, are you using FWD with SIP or IAX? Anyway I > >>>am using one FWD IAX to access an IVR that allow callers to choose > >>>which extension they want and that works fine. I am also using another > >>>FWD with SIP that allows the caller to access MeetMe and the meetme > >>>requires a PIN and that works fine also. I did have a problem, when > >>>DtmfMode=Inband, so I just deleted this and it all works fine. What is > >>>the default? I have no idea, but it works great without it. > >>> > >>>ulaw only applies to IAX channels, not SIP. > >>> > >>>Regards > >>>Garry Taylor > >>> > >>>------------------------------------------------------------------------ > >>> > >>>_______________________________________________ > >>>Asterisk-Users mailing list > >>>Asterisk-Users@lists.digium.com > >>>http://lists.digium.com/mailman/listinfo/asterisk-users > >>>To UNSUBSCRIBE or update options visit: > >>> http://lists.digium.com/mailman/listinfo/asterisk-users > >>> > >>> > >>> > >>_______________________________________________ > >>Asterisk-Users mailing list > >>Asterisk-Users@lists.digium.com > >>http://lists.digium.com/mailman/listinfo/asterisk-users > >>To UNSUBSCRIBE or update options visit: > >> http://lists.digium.com/mailman/listinfo/asterisk-users > >> > >> > >> > > > >_______________________________________________ > >Asterisk-Users mailing list > >Asterisk-Users@lists.digium.com > >http://lists.digium.com/mailman/listinfo/asterisk-users > >To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > > > > > > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > ---------------End of Original Message----------------- _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
