> I have read a lot about the thread of faxing support in Asterisk as > well as spanDSP. However, either I don't fully understand other > people's applications or may be what I'm trying to do is different > from what others are trying to do. > > I have a very simple setup. I have an asterisk server with a TE110P > connected to the PSTN via T1 PRI (Asterisk A). I have another > asterisk server with a TDM40B board with 4 FXS ports (Asterisk B) > where I have an actual physical fax machine connected to one of these > ports. These two machines are in two separate locations connected via > a point-to-point T1 circuit. What I wish to do is program a DID on > the T1 so that when the call comes into Asterisk A on that DID, it > will be routed via IAX2 to Asterisk B, which will in turn patch the > call through the FXS port where the fax is connected. Obviously, I > also wish to be able to send faxes in a similar opposite direction. > > Is this possible with Asterisk? Will it work?
The bottom line is that it may work "if" you run g711 across all machines; including the iax link. g711 is the only common codec that would come close to supporting modem/fax calls. Personally, I'd give that about a 50% chance of working. _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
