Quoting from: http://www.voip-info.org/tiki-index.php?page=Asterisk%20Zaptel%20Installation As I haven't got a Digium card, I need a timer which can be provided by ztdummy, zaprtc or zaprai.
But anyway the results are the same with or without zaprtc loaded. Peer Oliver Schmidt wrote: > Nicolas Olivier wrote: > >> I'm trying to setup a small BRI ISDN <-> voip gateway. >> The ISDN card is based on Cologne chipset, so I try set it up with > zaphfc. >> >> The versions i'm running: >> kernel-2.4.27 >> Asterisk 1.0.7-BRIstuffed-0.2.0-RC8e >> zaptel modules 1.0.7 >> zaphfc is from bristuff-0.2.0-RC8e >> >> When I'm doing the insmod on zaptel, zaphfc, zaprtc: >> >> Zapata Telephony Interface Registered on major 196 >> PCI: Found IRQ 12 for device 00:12.0 >> zaphfc: CCD/Billion/Asuscom 2BD0 configured at mem 0xc3840000 fifo > 0xc2d58000(0x2d58000) IRQ 12 HZ 100 >> zaphfc: Card 0 configured for TE mode >> Registered Span 1 ('ZTHFC1') with 3 channels >> Span ('ZTHFC1') is new master >> zaphfc: 1 hfc-pci card(s) in this box. >> Registered Span 2 ('ZTRTC/1') with 0 channels >> Real Time Clock Driver v1.10e >> >> I'm using zaprtc as the gateway is running on a VIA motherboard > without USB controller. > [..] > > Why are you running zaprtc? zaphfc provides your needed timing source. > -- > Best regards > > Peer Oliver Schmidt > PGP Key ID: 0x83E1C2EA > > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users