Hi, I have 2 Asterisk servers in .pg and 2 in .au
In .pg I have had to configure them as if they were in .au and use LS signaling. I am using the latest Asterisk @ Home (1.0) and it is working well with 1 TDM400P for interfacing with the PSTN lines. Previously I had exactly the problem you have described using Asterisk @ Home (0.7). I also had a memory leak problem in that all the memory 512Mb would be gradually used up and after about 3 days the audio would begin to suffer. The upgrade was a full reinstall and rebuild from documentation and once completed, the problems have not reappeared. These server are also NTP servers and DHCP servers Regards, T > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of > [EMAIL PROTECTED] > Sent: Monday, 23 May 2005 12:49 PM > To: asterisk-users@lists.digium.com > Subject: [Asterisk-Users] Hangup Issues on TDM40B FXO Australia > > Afternoon all, > > After doing some test on my asterisk box I can successfully > receive calls to my Asterisk PBX to a SIP phone from The > Telstra PSTN network > > Dial out from a sip phone is also not an issue, all calls > connect and terminate normally. > > If I call the Asterisk PBX say from PSTN in Zap1-1 and out through > ZAP2-2 back to the PSTN (after entering the correct pin off > course) the card does not appear to detect the hang-up, I > then have to issues a soft hang-up to close the call, I > presume this indicates the card is configured to receive the > correct hangup signal > > I have tried enabling callprogress, busydetect and a few > settings on the busycount but to no success > > I've also tried LS and KS signalling > > Does anyone else have any suggestions to get this to work > with Australia's Telstra? > > > > Regards > > Haydn > > > > > > > -------------------------------------------------------------- > ------------------------------------------------------ > This email and any files transmitted with it are confidential > and intended solely for the use of the individual or entity > to whom they are addressed. > If you have received this email in error please notify the > originator of the message. This footer also confirms that > this email message has been scanned for the presence of > computer viruses. > > Any views expressed in this message are those of the > individual sender, except where the sender specifies and with > authority, states them to be the views of LMC. > > -------------------------------------------------------------- > ------------------------------------------------------ > > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
