Hi Gavin, Can you recommend a good card/modem for the UK? Looks like I'm going down the same track as you. At first I was going for the TDM400 dev kit but they are not certified or available yet in the UK and I wanted to play :-)
Cheers, Phil. On Saturday 28 May 2005 21:41, [EMAIL PROTECTED] wrote: > Hi Gavin, > > Thanks for the reply. I did look at the wiki and read the page you pointed > at. According to the wiki mark didn't want to add caller id for the x100p > card. I found patches for the x100p card and just this minute re-compiled > and they work a treat. Was just wondering if the patches had been put into > the CVS and if not was there plans to put the patches in. Would be a shame > to waste the work and to deny caller id for these cards in the UK. Well, the official line is as Mr. Spencer has made in that bugtracker entry... Digium sell the TDM400P which supports polarity detection. CVS supports UK CallerID on that card. Digium no longer sell the X100P so it's not supported any more. The X100P is a fairly crappy choice for the UK since it has a hardcoded 600ohm impedance, suitable really only for the USA... But yes, 'it was only £10 on eBay' been there done that, wasted hours playing with txgain/rxgain/echo cancellation... :) Cheers, Gavin _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
