|
That should work but you need to have the asterisk box
setup to do pri-net on the connection to the PM3. I would add the did dialed so
that the PM3 knows about it for radius accounting..
exten => 1234567890, 1, Dial(Zap/g2/${EXTEN})
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Adam Vocks Sent: Wednesday, June 01, 2005 12:02 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [Asterisk-Users] Pass-through Would something as
simple as this work? [InFromZap1]
;Context for incoming telco calls exten => 1234567890,
1, Dial(Zap/g2) ;g2 would be the second digium card
connected to our Lucent PM3 with a crossover cable. Thanks Adam From:
[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Adam Vocks We’re still using
Lucent PM3’s Adam From:
[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Alexander Lopez This may or may not
work due to timings slips that you may experiance with the Digium Cards.
Your are correct in assuming this scenaro. I did the same
(pre-asterisk) with an Adtran Atlas. It is rock solid and works
great. What modem access bank are you using, there has been some talk
about using the PM3 as an IAX gateway. (highly vaporware at this point), The
Acend unit support SIP, the Cisco suport..., etc.
etc, From:
[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Adam Vocks In an order to save money, I would
like to use a PRI that we have going to one of our dial-up modem banks (We are
an ISP.) During business hours these channels are idle and during our peak
internet times, we are closed. Sounds too good to be true, but I thought I
would throw it out there. These are modem calls that if they would call
our modem bank number, they would be bridged to the outbound zap
channels??? And of course, if they dial our business number we would send
them to the appropriate sip channels. I didn’t know if this could be done
with two T1 cards and asterisk… Here is a primitive
sketch.
If anyone has information, please
share. Thank
You Adam
Vocks CTI |
_______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
