Hello! Continuing my PRI saga - I have a PRI setup and appears to be answering calls OK, but my carrier is cutting all the calls after 15 seconds. For example, when I call from my cell phone, it goes straight to a busy signal - however the CLI shows the call coming in and being answered. Additionally, when I call from another ground line, it will ring once or twice, again show as answered, but then give a busy tone. I have a TE110P.
I called my carrier and they told me that it gave their trace a "No User Responding" - however I show my box is answering! Any ideas? I verified that my D-chan should be 24 and the switch is of ni1. Is there some other method or signalling I ought to be using to indicate to the carrier's switch that I have answered? Should I have the carrier switch something for me? Thanks in advance guys - i'm going to put my entire experiences on this one in the wiki :) ** zaptel.conf defaultzone=us span=1,1,0,esf,b8zs bchan=1-12 dchan=24 loadzone=us ** zapata.conf ( cut for brevity) signalling = pri_cpe switchtype = ni1 context = DIDincoming group = 2 channel => 1-12 ** extensions.conf (cut for brevity) [DIDincoming] exten => 0980,1,Answer exten => 0980,2,Dial(SIP/p100,30) exten => 0980,3,Voicemail(100) Here's my CLI output on a cut call (i added the XXXX ) -- Accepting call from '734432XXXX' to '0980' on channel 0/1, span 1 -- Executing Answer("Zap/1-1", "") in new stack == Spawn extension (DIDincoming, 0980, 1) exited non-zero on 'Zap/1-1' -- Hungup 'Zap/1-1' -- Tom _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users