Getting the ztdummy module out of the mix corrected the problems I was
having. Try the following:
genzaptelconf -s -d
After that has completed, with lines attached, I did a
rebuild_zaptel
Your mileage may vary, but this seemed to do the trick for me.
----- Original Message -----
From: "Dan Littlejohn" <[EMAIL PROTECTED]>
To: "Asterisk Users Mailing List - Non-Commercial Discussion"
<[email protected]>
Sent: Wednesday, June 08, 2005 3:42 PM
Subject: Re: [Asterisk-Users] * @ Home: All Circuits busy
I got these errors and my hardware is working so I do not think they
are an issue
Hint: insmod errors
&
Removing zaptel module: zaptel: Device or resource busy
What about the ztdummy module?
Dan
On 6/8/05, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote:
Dean,
Here are the results of the genzaptelconf -s -d. As you can see, it is
throwing some errors, but I am a bit of a newbie so any help you could
provide
would be greatly appreciated!
[EMAIL PROTECTED] /]# genzaptelconf -s -d
STOPPING ASTERISK
Asterisk ended with exit status 0
Asterisk shutdown normally.
Disconnected from Asterisk server
Asterisk Stopped
STOPPING FOP SERVER
FOP Server Stopped
Hint: insmod errors can be caused by incorrect module parameters,
including
invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
Hint: insmod errors can be caused by incorrect module parameters,
including
invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
Hint: insmod errors can be caused by incorrect module parameters,
including
invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
Hint: insmod errors can be caused by incorrect module parameters,
including
invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
Hint: insmod errors can be caused by incorrect module parameters,
including
invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
Hint: insmod errors can be caused by incorrect module parameters,
including
invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
Hint: insmod errors can be caused by incorrect module parameters,
including
invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
Hint: insmod errors can be caused by incorrect module parameters,
including
invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
Unloading zaptel hardware drivers:
Removing zaptel module: zaptel: Device or resource busy
[FAILED]
Loading zaptel framework: [ OK ]
Waiting for zap to come online ...OK
Loading zaptel hardware modules:
Running ztcfg: [ OK ]
SETTING FILE PERMISSIONS
Permissions OK
STARTING ASTERISK
Asterisk Started
STARTING FOP SERVER
FOP Server Started
** SIP/200 in position 2
** SIP/201 in position 3
** SIP/202 in position 4
Chan Extension Context Language MusicOnHold
pseudo from-pstn en
Verbosity is at least 3
[EMAIL PROTECTED] /]#
[EMAIL PROTECTED] /]#
Thanks,
Marc
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
