Hmm, Replying to my own post, forgot one important detail: Asterisk 1.0.7-BRIstuffed-0.2.0-RC8g
Stijn On 20-Jun-2005 20:20, Stijn Jonker wrote: > Hello all, > > Recently I purchased an QuadBRI card from junghanns.net after some > playing around, reconfiguring dialplans etc with the exception of 1 > thing everything seems to work: > > I seem to be unable to set the outbound callerid. The dutch telecom > operator (KPN) provided me with 4 MSN's on 1 BRI interface. In the past > years I'm more then used to setting the MSN without the leading 0, this > always worked fine. > > With the QuadBRI this didn't work, added the 0, messed around with > CallingPres, SetCallerPres and the various callerid and usecallerpres > values in zapata.conf. (Off course found via google, mailinglist, > voip-info etc) All calls resulting to be presented at the far end with > the network default caller id. > > I'm lost, can somebody provide some assistance, attached is an output of > bri debug span 1 (this due to line wraps..) > > But I think this is the network returning my error: > "Ext: 1 Cause: Invalid information element contents (100), class = > Protocol Error (6)" > > My zapata is short, but as said the various caller id options have > passed through this file ;-) > zapata.conf: > -------------- > [channels] > switchtype = euroisdn > pridialplan = dynamic > prilocaldialplan = local > nationalprefix = 0 > internationalprefix = 00 > musiconhold=default > echocancel = yes > echocancelwhenbridged = no > echotraining = 100 > ;------------------------- > signalling = bri_cpe_ptmp > context=pstn-inbound > group = 1 > channel => 1-2 > ;------------------------- > signalling = bri_net_ptmp > context=isdn-inbound > group = 2 > channel => 4-5 > > Part of dialplan: > ------------------ > exten => _0.,1,SetCallerID(${EDN_MAIN:1}) > exten => _0.,2,Dial(${ZAP_MAIN}${EXTEN:1},30) > exten => _0.,3,Macro(dial-result) > > exten => _9.,1,SetCallerID(${EDN_WORK:1}) > exten => _9.,2,Dial(${ZAP_MAIN}${EXTEN:1},30) > exten => _9.,3,Macro(dial-result) > > Variables: > ----------------- > ZAP_MAIN=Zap/g1/ > EDN_MAIN=022929XXX0 > EDN_WORK=022927XXX7 > > The 022929XXX0 is the "default" msn, even if i try to set this > explicitly it gets rejected with the network message as mentioned above. > (But because it's default all calls will originate with 22929XXX0) > > If more info is needed don't hesitate to ask for it I'm kind of lost on > what to provide. > > Thanks in advance. > > > > ------------------------------------------------------------------------ > > -- Executing SetCallerID("SIP/SJCC7960-ac64", "22927XXX7") in new stack > -- Executing CallingPres("SIP/SJCC7960-ac64", "3") in new stack > -- Executing Dial("SIP/SJCC7960-ac64", "Zap/g1/0646XXX645|30") in new > stack > -- Making new call for cr 140 > -- Requested transfer capability: 0x00 - SPEECH > >>Protocol Discriminator: Q.931 (8) len=38 >>Call Ref: len= 1 (reference 12/0xC) (Originator) >>Message type: SETUP (5) >>[04 03 80 90 a3] >>Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer capability: >>Speech (0) >> Ext: 1 Trans mode/rate: 64kbps, circuit-mode >> (16) >> Ext: 1 User information layer 1: A-Law (35) >>[18 01 81] >>Channel ID (len= 3) [ Ext: 1 IntID: Implicit, Other Spare: 0, Preferred >>Dchan: 0 >> ChanSel: B1 channel > > ] > >>[6c 0b 41 83 32 32 39 32 37 3X 3X 3X 37] >>Calling Number (len=13) [ Ext: 0 TON: Subscriber Number (4) NPI: >>ISDN/Telephony Numbering Plan (E.164/E.163) (1) >> Presentation: Presentation allowed of network >> provided number (3) '22927XXX7' ] >>[70 0a a1 36 34 36 3X 3X 3X 36 34 35] >>Called Number (len=12) [ Ext: 1 TON: National Number (2) NPI: >>ISDN/Telephony Numbering Plan (E.164/E.163) (1) '646XXX645' ] >>[a1] >>Sending Complete (len= 1) > > -- Called g1/0646XXX445 > < Protocol Discriminator: Q.931 (8) len=12 > < Call Ref: len= 1 (reference 140/0x8C) (Terminator) > < Message type: STATUS (125) > < [08 03 82 e4 6c] > < Cause (len= 5) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location: > Public network serving the local user (2) > < Ext: 1 Cause: Invalid information element contents (100), > class = Protocol Error (6) ] > < Cause data 1: 6c (108) > < [14 01 01] > < Call State (len= 3) [ Ext: 0 Coding: CCITT (ITU) standard (0) Call state: > Call Initiated (1) > -- Processing IE 8 (cs0, Cause) > -- Processing IE 20 (cs0, Call State) > < Protocol Discriminator: Q.931 (8) len=7 > < Call Ref: len= 1 (reference 140/0x8C) (Terminator) > < Message type: CALL PROCEEDING (2) > < [18 01 89] > < Channel ID (len= 3) [ Ext: 1 IntID: Implicit, Other Spare: 0, Exclusive > Dchan: 0 > < ChanSel: B1 channel > ] > -- Processing IE 24 (cs0, Channel Identification) > < Protocol Discriminator: Q.931 (8) len=8 > < Call Ref: len= 1 (reference 140/0x8C) (Terminator) > < Message type: ALERTING (1) > < [1e 02 82 88] > < Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 > Location: Public network serving the local user (2) > < Ext: 1 Progress Description: Inband > information or appropriate pattern now available. (8) ] > -- Processing IE 30 (cs0, Progress Indicator) > -- Zap/1-1 is ringing > > > ------------------------------------------------------------------------ > > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users -- Met Vriendelijke groet/Yours Sincerely Stijn Jonker <[EMAIL PROTECTED]> _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users