Do you know what codec is being used on the rtsp stream that you are generating?
Asterisk cli says unknown to unknown which means its not able to determine the codec, I guess you r almost sorted if you r able to get the video in H.263 or H.264 format over RTSP. Regards, Mitul Limbani anurag agarwal <[email protected]> wrote: > >Hi, >I have successfully installed the H324m gateway and trying to use rtsp but we >are facing the following issue : >1. when we use the trans-coder then our asterisk is die... >[3g] >exten => s,1,h324m_gw(3333@rtsp) >[rtsp] >exten => 3333,1,Set(CHANNEL(transfercapability)=DIGITAL)exten => >3333,n,wait()exten => 3333,n,h324m_gw_answer()exten => >3333,n,Transcode(,s@camera,h263@qcif/fps=10/kb=52/qmin=4/qmax=12/gs=50) > > >[camera] >exten => s,1,Answer() >exten => s,n,rtsp(rtsp://192.168.1.130:554/mpeg4) >exten => s,n,Hangup() > >2. Again we are trying it with rtsp: this time my call is connected but when >it reaches to rtsp step then call is disconnected with the following error msg >: can anyone please suggest the way forward ,our dial plan & error logs as >below : > >----------------------------------------------------------------------------------------------------------- >[3g] > >exten => s,1,h324m_gw(3333@rtsp) > >[rtsp] > >exten => 3333,1,Set(CHANNEL(transfercapability)=DIGITAL) >exten => 3333,n,wait() >exten => 3333,n,h324m_gw_answer() >exten => >3333,n,rtsp(rtsp://192.168.1.130:554/mpeg4) > >------------------------------------------------------------------------------------------------------------ >-- Executing [s@3g:1] h324m_gw("Zap/42-1", "3333@rtsp") in new stack > -- Executing >[3333@rtsp:1] Set("Local/3333@rstp-4405,2", >"CHANNEL(transfercapability)=DIGITAL") in new stack > -- Executing >[3333@rtsp:2] Wait("Local/3333@rtsp-4405,2", "") in new >stack > -- Executing [3333@rtsp:3] h324m_gw_answer("Local/3333@rtsp-4405,2", "") >in new >stack > -- Executing [3333@rtsp:4] rtsp("Local/3333@rtsp-4405,2", >"rtsp://192.168.1.130:554/mpeg4") in new stack >[Feb 16 19:52:00] >WARNING[6841]: app_rtsp.c:1383 rtsp_play: >rtsp play >[Feb 16 19:52:00] >WARNING[6841]: channel.c:2781 set_format: Unable to find a codec translation >path from unknown to unknown >[Feb 16 19:52:00] ERROR[6841]: app_rtsp.c:1678 >rtsp_play: No media found >[Feb 16 19:52:00] WARNING[6841]: app_rtsp.c:2060 >rtsp_play: <rtsp_play > == Auto fallthrough, channel 'Local/3333@rtsp-4405,2' status >is 'UNKNOWN' > == Spawn extension (3g, s, 1) exited non-zero on >'Zap/42-1' > -- Hungup 'Zap/42-1' > > >------------------------------------------------------------------------------------------------------------------------------------ > > >Thanks >Anurag --- On Sun, 13/2/11, anurag agarwal <[email protected]> >wrote: > >From: anurag agarwal <[email protected]> >Subject: Re: [Asterisk-video] H324m gateway mp4 play >To: [email protected] >Date: Sunday, 13 February, 2011, 9:45 AM > >Thanks Liu, > >I have tried the same, out of 5 calls 2 calls are working fine but 3 calls are >stuck up in the H324m_gw_answer() & doesn't go to the next step... please >suggest... > > >Regds > >Anurag > > >--- On Sat, 12/2/11, Liu Jianquan <[email protected]> wrote: > >From: Liu Jianquan <[email protected]> >Subject: Re: [Asterisk-video] H324m gateway mp4 play >To: "Development discussion of video media support in Asterisk" ><[email protected]> >Date: Saturday, 12 February, 2011, 5:22 PM > > > > > >Hi, try blow: > > > >[3gphone] >exten => >444444,1,h324m_gw(3333@video) > > > > >[video] >exten => 3333,1,h324m_gw_answer() >exten => >3333,n,mp4play(/tmp/jefflew.3gp) > > > >Wayne Lau > >CTO @ http://www.51asterisk.com >MSN: [email protected] > > -----ORI----- >Sender: > [email protected] > [mailto:[email protected]]代表 anurag > agarwal >Time: 2011年2月12日 19:09 >Rece: Development > discussion of video media support in Asterisk >Subject: Re: > [Asterisk-video] H324m gateway mp4 play > > > > > > Hi, > > > 1. I have downloaded a 3gp file from the i6net.com. the mp4info > command for that file shows : > > > > [root@localhost tmp]# mp4info jefflew.3gp > mp4info version 1.5.0.1 > jefflew.3gp: > Track Type Info > 201 video H.263, 441.280 secs, 35 kbps, > 176x144 @ 6.954768 fps > 65335 hint Payload H263-2000 for track >201 > 101 audio AMR, 441.280 secs, 13 kbps, 8000 > Hz > 65435 hint Payload AMR for track 101 > 1 od Object > Descriptors > 2 scene BIFS > > > 1. if i try to mp4play this file on a sip extnesion it works > fine > 2. if i try to mp4play this file from a 3G > phone-->PRI--->Asterisk--->dialplan , i dont see any video or > audio on the 3G phone > > > the dial plan is : > > > > [3gphone] > exten => 444444,1,h324m_gw(3333@video) > > > > > [video] > exten => 3333,1,mp4play(/tmp/jefflew.3gp) > > > > > > > > > pl let me know how to play a generic mp4 file [downloaded from > internet or recorded on a samsung/nokia [mpeg4] ] > > > >Thanks > > > Anurag Agarwal >--- On Sat, 12/2/11, Liu Jianquan > <[email protected]> wrote: > > >From: > Liu Jianquan <[email protected]> >Subject: Re: > [Asterisk-video] H324m gateway mp4 play >To: "Development discussion > of video media support in Asterisk" > <[email protected]> >Date: Saturday, 12 > February, 2011, 2:11 PM > > > > Plz post your dialplan details > here, maybe you forget h324m_gw() before > h324m_answer? > > Wayne Lau > > CTO @ > http://www.51asterisk.com > MSN: [email protected] > > > -----Ori----- >Sender: > [email protected] > [mailto:[email protected]]Response > anurag agarwal >Time: 2011-2-12 > 1:30 >Rece: Development discussion of video media support > in Asterisk >Subject: [Asterisk-video] H324m gateway mp4 > play > > > > > > > Hi > > i've successfully installed h324m gateway and all > required files for making 3G calls over ISDN and playing a > mp4 > file. i've first tried to connect 2 sip phones and did a > recording of video and saved it as mp4 file. the said mp4 > file > also plays if i call in an sip extension and try to play it > under dial plan. > > now i want to make a 3G call over PRI that i connected to > asterisk box and play that mp4 file. the prob is when i make > the 3G call - on my phone it just displays "waiting for > image" > adn then hangs up after a few seconds..on the astrisk debug > - i see that the call is struck at h324m_answer > ...i want to know what can be wrong ? i also have a doubt if > i > have to add something like " > Set(CHANNEL(transfercapability)=VIDEO)" before trying to > play the file ?? > > pls help > > > >-----Inline > Attachment Follows----- > > > -- >_____________________________________________________________________ >-- > Bandwidth and Colocation Provided by http://www.api-digital.com -- > >asterisk-video > mailing list >To UNSUBSCRIBE or update options > visit: > http://lists.digium.com/mailman/listinfo/asterisk-video > >-----Inline Attachment Follows----- > >-- >_____________________________________________________________________ >-- Bandwidth and Colocation Provided by http://www.api-digital.com -- > >asterisk-video mailing list >To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-video > > > >-- >_____________________________________________________________________ >-- Bandwidth and Colocation Provided by http://www.api-digital.com -- > >asterisk-video mailing list >To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-video -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-video mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-video
