I've solved my own problem. It looks like syntax has changed a little. In my zapata-auto.conf, all I need to put is: channel=1
NOT channel => 1 On Sun, 2006-30-07 at 10:38 -0400, Mark Rzepa wrote: > Greetings, > > I've recently upgraded to asterisk 1.2.10 and freepbx 2.1.1. Ever since > I installed the new version, I can't get asterisk to recognize my FXO > card. It worked just fine with asterisk 1.0. > > All my SIP and IAX2 extensions and IAX2 trunks work just fine. > > I've installed the latest zaptel 1.2.7 modules as well, and they are > loading just fine. > > -bash-3.00# lsmod |grep wcfxo > wcfxo 11552 0 > zaptel 186628 3 wcfxo > > -bash-3.00# cat /proc/zaptel/1 > Span 1: WCFXO/0 "Generic Clone Board 1" > > 1 WCFXO/0/0 FXSKS > > Freepbx stores all the configurations inside a MySQL database (or so I'm > lead to believe). I can query the database to get all the configuration > info on my sip extensions, call routing, inbound routing etc... except I > can't find the data for the zap channels. The table called "zap" is > empty. > > When I manually add the following config to > the /etc/asterisk/zapata-auto.conf, asterisk will not load. > context=from-pstn > group=0 > channel => 1 > > I've also tried with context=from=zapata. > > I've run asterisk with lots of -vvvvvvv, but it does not give me an > error message, it just exits with result 1. > > >From inside asterisk CLI: > aimhigh*CLI> zap show channels > Chan Extension Context Language MusicOnHold > pseudo from-pstn en > > > Any help would be appreciated. > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] >
