Ok, so I managed to get into the page, dont ask how, even I am not sure.
This is the config as it sits.
ATA Setup Menu
Admin Login </admin/setup>
Network Information
DHCP: Enabled Current IP: 192.168.0.200
Host Name: ata Domain:
Current Netmask: 255.255.255.0 Current Gateway: 0.0.0.0
1st DNS:
2nd DNS:
Product Information
Product Name: ATA-1000 Serial Number: A10436BC3E7C
Firmware Version: 2.1.18 MAC Address: 00006BA53E7C
System Status
Current Time: 1/1/2003 12:07:42 Elapsed Time: 00:07:42
Hook State: On Registration: Failed
Call 1 State: Idle Call 2 State: Idle
Call 1 Tone: None Call 2 Tone: None
Call 1 Encoder:
Call 2 Encoder:
Call 1 Decoder:
Call 2 Decoder:
RTP Packets Sent: 0 RTP Bytes Sent: 0
RTP Packets Recv: 0 RTP Bytes Recv: 0
SIP Messages Sent: 16 SIP Bytes Sent: 7879
SIP Messages Recv: 0 SIP Bytes Recv: 0
Password Setup
User Password:
Network Setup
DHCP: Static IP:
NetMask: Gateway:
HostName: Domain:
1st DNS: 2nd DNS:
Admin Login </admin/setup>
I basically want to know how to setup so I can route calls to and from
this phone.. I am having some difficulty with it... having a day of
brain freeze I guess. I have not the faintest clue how to 'log in' a
pstn phone from the ata.
Thomas
Thomas Keats wrote:
OK, new toy..
I finally got my hands on a ata that will allow me to build on the
already built server and softphone on my main computer.
After a battle getting dhcp going, and figuring out the IP that was
granted to it.
I have a regular cordless phone with a 2 line display plugged into the
ata.
I have been told that it is using european tones (not the regular
dialtone for north america)
The Link light on the back is on, the status line on the front is off.
I can not after initially accessing the configuration page access it
anymore. I get a 401 unathorized.
I did however change details to fit with the local network (static was
listed as 192.168.1.198 which was changed to 192.168.0.200 etc)
Is there a way I can reset the password and user info?
I hope I didnt fubar anything ... The one thing I did notice on the
admin/config screen was it came up as a ata-1000 which googled as a
sipcom.
Thomas
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
