According to http://www.voip-info.org/wiki/view/Asterisk+cmd+ResetCDR you want to do ResetCDR(w) before your second leg.
- Ian On 2/27/07, John Oladehinde <[EMAIL PROTECTED]> wrote:
Hello, I need to know why this is not working as I suspect it should. What I have is the system Answer() an incoming call. (The CDR starts recording call 1). The caller is given an option to Dial to customer service (CDR of call 2 is not recorded). After the bridge is done and both parties have hung up, I suspect that there should be two entries in the CDR. Originating number and the second leg of this call. This is what I have in my dial plan. Everything works as the call routing and bridging. It is just the CDR that I am baffled with. ORIGINATING LEG: CDR records properly with accountcode = 100 if the call is hung up at this point exten=>4165487558,1,Set(CDR(accountcode)=100) exten=>4165487558,n,VXML(http://192.168.2.30/tele/mainmenu.php) exten=>4165487558,n,GotoIf($["${VXML_RESULT}" = "Transfer"]?trans:no) exten=>4165487558,n(trans),Goto(SECOND_LEG,s,1) exten=>4165487558,n(no),Hangup() SECOND_LEG CDR does record accountcode = 101 after the call but gives an aggregate total of the call with no mention of the originating accountcode 100. exten => s,1,Wait,1 exten => s,n,Set(SCREEN_FILE=/tmp/${CALLERID(number)}-${EPOCH}) exten => s,n,Record(${SCREEN_FILE}.gsm|6|25) exten => s,n,Set(CDR(accountcode)=101) exten => s,n,Dial(SIP/${FINDME1}${SIPCO1},60,mgM(screen^${SCREEN_FILE})) My goal is to have CDR say something like accountcode 100 2:00 mins and accountcode 101 30s. After the call is hung up. But in writing this I think I understand what is happening. Because if I do it my way it would seem that the call is 2:30s when actually it was a total of 2:00 mins, with a 0:30s interim of 2 channels being used. Addendum: Can and should I create another table to hold the second leg? The second leg is important because it will always be a long distance call and the time is important. Regards, John --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
