First, there is a firmware upgrade for the Sangoma cards which fixes this issue.
But you can also disable the channel in Asterisk/Zaptel. /etc/zaptel.conf ... bchan = 1-18 dchan = 24 /etc/asterisk/zapata.conf ... channel => 1-18 You have to completely stop/start asterisk & wanpipe/zaptel for those changes to take effect. And I'm not sure how your PRI provider will handle the down channels. Will it return a busy signal to the caller or will it roll to a working channel? John On Thu, 2007-10-18 at 10:29 -0400, David Steele wrote: > Hi, > > Urgent problem - can anyone tell me how to disable a channel on my PRI? > I've got channel 19 faulty on my 20 channel Sangoma card (channels 21-23 > have been stripped out of the PRI by the provider). > > I figure the quickest first step is to turn the channel off until I'm back > from vacation :( > > Thanks, > Dave. --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
