Hi Reza, Do you have the Hardware Echo Cancellation Module on that card? Sounds to me like your echo can is training for too long. Do you have a taps value defined in zapata.conf for echocancel? Is echotraining enabled, or set to a particularly high value?
AR ________________________________________________________ Alex Robar, Technical Support, GearyTech Inc. 3075 Fourteenth Avenue, Unit 3, Markham, Ontario L3R 0G9 Markham: 905-513-8000 x 223 Fax: 905-513-8040 Toronto: 416-226-3614 Toll Free: 888-890-3499 [EMAIL PROTECTED] www.gearytech.com Strategic management of technology for business. -----Original Message----- From: Reza - Asterisk Enthusiast [mailto:[EMAIL PROTECTED] Sent: Monday, October 29, 2007 2:56 AM To: TAUG Subject: [on-asterisk] Audio Delay in 1.4? Has anyone experienced any form of "audio delay" in 1.4 using Sangoma A200D? A friend's server seems to be connecting to the Auto Attendant without any problem... but when the call is routed to an extension (PSTN to Office Extensions) -- and an employee picks up the phone and says "Hello", the "hello" is cut off. I'm at a loss of what the problem is and at a loss of what to advise. I believe the machine is running TrixBox or some GUI. Another reason I can't be of much help as I'm more of the pure command line Asterisk dude, vs the sooped-up GUI/TrixBox/FreeBX dude. My hunch says to upgrade the firmware on the A200D, which will do the trick... but its just a hunch. Thanks! Reza. --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
