Leif, You may find further info on the microbrowser and some useful scripts: http://www.voip-info.org/wiki/view/Polycom+Microbrowser
I am sure you have seen the following link, but if you have not, there are info on the new firmware etc http://www.voip-info.org/wiki/view/Polycom+Phones Just a note, if you are currently running firmware 1.6 series on your ip 50x series polycom phones, the 2.x series xml configuration are different and of course a lot easier to work with in comparison to the 1.6 series... Good luck! Elliott -----Original Message----- From: Leif Madsen [mailto:[EMAIL PROTECTED] Sent: Saturday, January 19, 2008 2:25 PM To: Elliott Jeyaseelan Cc: [email protected] Subject: Re: [on-asterisk] Changing Polycom Line Display Remotely On Jan 18, 2008 10:51 PM, Elliott Jeyaseelan <[EMAIL PROTECTED]> wrote: > Leif, > > Polycom 2.2+ version supports push xml configuration. The built in > xhtml browser could be useful, somehow there is no mention of changing > the line label. But, there is an idle browser which could be > programmed to display what you wish etc > > Developers guide can be found here: > http://www.polycom.com/common/documents/support/setup_maintenance/prod > ucts/v oice/soundpoint_ip_soundstation_ip_developers_guide.pdf > > If you do find a solution, would love to hear about it. Thanks Elliot! This just might work... from the guide: "The idle display Microbrowser is independent of the main Microbrowser, but is capable of rendering the same content. Its home page is configured via the mb.idleDisplay.home configuration parameter. The idle display Microbrowser does not accept any user input and will only appear when the user has no phone calls in progress and the phone is in the idle user interface state. The idle display Microbrowser can update its content based on a configurable refresh timer or by honoring the value of the Refresh header. " I'm gonna give that a shot on my IP501 here and see if I can't make something work. If I come up with a solution, I'll be sure to let everyone know how I went about it. This is for a paid client, so I'll see if I can't release some of the specifics when I'm done (if indeed this approach works). Thanks again! -- Leif Madsen. http://www.leifmadsen.com http://www.oreilly.com/catalog/asterisk --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
